how to fix the Ford Explorer Sixth Generation (2020-present) lane keeping assist not functioning

Ford Explorer Sixth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

574 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix Lane Keeping Assist issues in 2020-present Ford Explorer. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in park before working on any electronic systems.

Symptoms

•Lane Keeping Assist warning light illuminated on the dashboard
•Vehicle does not provide steering assistance when drifting out of the lane
•Inconsistent notifications or alerts regarding lane departure
•System may fail to engage or disengage at appropriate speeds
•Reduced functionality in adverse weather conditions (rain, snow, fog)

Diagnostic Steps

1
Scan the vehicle's computer system using an OBD-II scanner to check for any stored error codes related to the Lane Keeping Assist system.
2
Inspect the front camera and radar sensors for any obstructions (dirt, snow, or debris) that may affect their operation.
3
Verify that the Lane Keeping Assist feature is enabled in the vehicle's settings through the infotainment system.
4
Check the vehicle's alignment to ensure that it is within specifications, as improper alignment can affect sensor accuracy.
5
Test the vehicle’s battery and electrical systems to make sure they are providing adequate power to operate advanced driver-assistance systems.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Soft cloth
•Cleaning solution
•Alignment rack (if needed)
•Torque wrench

Parts Required

•None required unless components are found defective during inspection.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Lane Keeping Assist warning light illuminated on the dashboard

•Vehicle does not provide steering assistance when drifting out of the lane

•Inconsistent notifications or alerts regarding lane departure

•System may fail to engage or disengage at appropriate speeds

•Reduced functionality in adverse weather conditions (rain, snow, fog)

Diagnostic Steps

1
Scan the vehicle's computer system using an OBD-II scanner to check for any stored error codes related to the Lane Keeping Assist system.
2
Inspect the front camera and radar sensors for any obstructions (dirt, snow, or debris) that may affect their operation.
3
Verify that the Lane Keeping Assist feature is enabled in the vehicle's settings through the infotainment system.
4
Check the vehicle's alignment to ensure that it is within specifications, as improper alignment can affect sensor accuracy.
5
Test the vehicle’s battery and electrical systems to make sure they are providing adequate power to operate advanced driver-assistance systems.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Gather all tools and parts needed for the repair.

2. Clean Sensors

Tools Required: Soft cloth, cleaning solution.
Wipe the front camera and radar sensors gently with a soft cloth and appropriate cleaning solution to remove any obstructions.
Ensure sensors are clear of any debris or dirt that could hinder functionality.

3. System Reset

Tools Required: OBD-II scanner.
Connect the OBD-II scanner to the vehicle’s diagnostic port.
Follow the instructions on the scanner to reset any error codes related to the Lane Keeping Assist system.

4. Alignment Check

Tools Required: Alignment rack (if needed), torque wrench.
If misalignment is suspected, take the vehicle to a professional alignment shop.
Adjust the alignment according to manufacturer specifications if necessary, and torque all suspension components to the specified values.

5. Feature Activation

Tools Required: Vehicle’s infotainment system.
Access the settings menu on the infotainment system.
Navigate to the driver assistance settings and ensure that Lane Keeping Assist is activated.

6. Test Drive

Conduct a test drive to verify that the Lane Keeping Assist system is functioning correctly.