how to fix the SRS light on my Ford Explorer Sixth Generation (2020-present)?

Ford Explorer Sixth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

critical

Severity

Error Code: B0090, B0091, B0001

3 min read

495 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the SRS light issue on your Ford Explorer (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

B0090, B0091, B0001

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the SRS system to prevent accidental airbag deployment.
•Allow the vehicle to sit for at least 10 minutes after disconnecting the battery to ensure all power is discharged.

Symptoms

•SRS light illuminated on the dashboard
•Possible warning messages related to the airbag system
•Airbags may not deploy in the event of a collision
•Reduced functionality of other safety systems

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues with the SRS system.
2
Inspect the vehicle's seat belt connections to ensure they are properly connected and not damaged.
3
Check the condition of the airbag modules and wiring harness for any visible damage or corrosion.
4
Verify the status of the battery; low voltage can affect the SRS system.
5
Inspect the crash sensors to ensure they are functioning correctly and are properly mounted.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Screwdrivers
•Multimeter

Parts Required

•Replacement airbag sensors (if faulty)
•Wiring harness connectors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues with the SRS system.
2
Inspect the vehicle's seat belt connections to ensure they are properly connected and not damaged.
3
Check the condition of the airbag modules and wiring harness for any visible damage or corrosion.
4
Verify the status of the battery; low voltage can affect the SRS system.
5
Inspect the crash sensors to ensure they are functioning correctly and are properly mounted.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal and allow the vehicle to sit for at least 10 minutes to discharge any residual power.
Ensure the vehicle is in a well-ventilated area and on a flat surface.

2. Retrieve Diagnostic Codes

Reconnect the battery temporarily.
Use an OBD-II scanner to retrieve SRS-related diagnostic trouble codes (DTCs).
Note the codes for reference; some common ones may include B0090, B0091, or B0001.

3. Reset the SRS Light

If the codes indicate a temporary issue, you may be able to reset the SRS light:
- Use the OBD-II scanner to clear the codes.
- Reconnect the battery and check if the SRS light remains off.

4. Repair Identified Issues

If specific issues were identified:
- For damaged wiring or connectors: Repair or replace the damaged components.
- For faulty crash sensors: Replace the sensors as needed.
- For seat belt connections: Ensure they are fully engaged and functional.

5. Final Checks

Reconnect the negative battery terminal securely.
Perform another scan to ensure no new error codes appear.
Start the vehicle and observe the dashboard for the SRS light.