how to reset the check engine light on my Ford Explorer Sixth Generation (2020-present)?

Ford Explorer Sixth Generation (2020-present)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

374 words

Problem Statement

Learn how to reset the check engine light on your Ford Explorer Sixth Generation (2020-present) with this step-by-step guide and diagnostic tips.

Affected Component

Engine

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and the parking brake is engaged before working on it.

Symptoms

•Check engine light illuminated
•Possible engine performance issues
•Error codes may be stored in the computer
•Recent maintenance or repairs may have triggered the light

Diagnostic Steps

1
Use an OBD-II scanner to check for error codes.
2
Identify and address any underlying issues that triggered the check engine light.
3
Clear the error codes using the OBD-II scanner.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None specifically required for resetting the light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner
Ensure the vehicle is parked on a level surface and the ignition is turned off before beginning.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard near the steering column.
Plug the OBD-II scanner into the port securely.

3. Turn on Ignition

Turn the ignition key to the "On" position without starting the engine (or press the start button without pressing the brake pedal) to power the scanner.

4. Read and Clear Codes

Follow the prompts on the OBD-II scanner to read error codes.
After reviewing the codes, select the option to clear/reset the codes.
Confirm the action on the scanner when prompted.

5. Disconnect the Scanner

Once the codes have been cleared, safely unplug the OBD-II scanner from the port.

6. Test Drive

Start the engine and take the vehicle for a short drive to ensure the check engine light remains off.