how to reset the oil change light in Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

358 words

Problem Statement

Learn how to reset the oil change light in your Ford Explorer (2020-present) with this step-by-step guide. Ensure accurate maintenance reminders.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure vehicle is in 'Park' and on a stable surface before performing any resets.

Symptoms

•Oil change light is illuminated on the dashboard
•Incorrect oil change interval notifications
•Maintenance reminder does not reset after oil change

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Press the gas pedal three times within five seconds.
3
Turn the ignition off and then back on to check if the light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required, but access to the vehicle owner's manual may be helpful.

Parts Required

•None required for resetting the oil change light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Gather the necessary tools, if needed, such as the vehicle owner's manual for reference.

2. Accessing the Vehicle Options

Turn the ignition to the "On" position without starting the engine.
On the steering wheel, locate the "Settings" button on the instrument cluster display.

Use the arrow keys on the steering wheel to scroll through the menu options.
Select "Vehicle" and then scroll to "Oil Life Reset."

4. Resetting the Oil Life

Once in the "Oil Life" menu, select "Reset."
Confirm the reset action when prompted by the system.

5. Verifying the Reset

Turn off the ignition.
Restart the vehicle to ensure the oil change light is no longer illuminated.