how to reset the oil change light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the oil change light on Ford Explorer Sixth Generation (2020-present) with this quick and easy guide. Step-by-step instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (automatic) or neutral (manual) before performing the reset.

Symptoms

•Oil change light remains illuminated on the dashboard
•Maintenance required notification displayed
•No engine performance issues

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Turn the ignition off and then back on to check if the oil change light has reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and ensure the vehicle is parked on a flat surface.
Make sure the engine is off and keys are removed from the ignition.

2. Access the Instrument Cluster

Insert the key into the ignition and turn it to the "On" position without starting the engine.
Confirm that all warning lights, including the oil change light, are illuminated.

3. Reset Oil Change Light

Quickly press the gas pedal three times within a span of 10 seconds.
Ensure to press the pedal fully to register the input accurately.

4. Verify Reset

Turn the ignition off and then back on.
Check to see if the oil change light has turned off. If it remains illuminated, repeat the previous steps.