how to reset the oil change light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

409 words

Problem Statement

Learn how to reset the oil change light on Ford Explorer Sixth Generation (2020-present) with this step-by-step guide. Ensure proper maintenance tracking.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in the 'On' position but not running to avoid any accidental movements.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder notification
•Engine oil life percentage showing as low or expired

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the vehicle’s display.
3
Select 'Vehicle' from the settings options.
4
Scroll down to 'Oil Life Reset' or 'Oil Change' option.
5
Follow on-screen prompts to reset the oil change light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the vehicle’s display.
3
Select 'Vehicle' from the settings options.
4
Scroll down to 'Oil Life Reset' or 'Oil Change' option.
5
Follow on-screen prompts to reset the oil change light.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle in "On" mode, but do not start the engine.

Turn the ignition key to the "On" position (press the "Start" button without pressing the brake pedal for push-to-start models).
Ensure all dashboard lights are illuminated.

3. Navigate to Oil Change Reset

Using the right arrow button on the steering wheel, scroll through the menu options until you reach "Settings."
Press "OK" or the center button to select the "Settings" menu.
Scroll down to "Vehicle" and select it by pressing "OK."

4. Reset Oil Life

In the "Vehicle" menu, scroll to find "Oil Life Reset" or "Oil Change."
Select this option and follow the prompts, usually by pressing "OK" or confirming the reset.
The display should indicate that the oil life has been reset to 100%.

5. Confirmation

Exit the menu and turn off the ignition.
Restart the vehicle to confirm that the oil change light is no longer illuminated.