how to reset the oil change light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

Less than 30 minutes

Time

easy

Difficulty

low

Severity

2 min read

373 words

Problem Statement

Learn how to reset the oil change light on Ford Explorer (2020-present) with this step-by-step guide. Ensure accurate maintenance tracking.

Affected Component

Electrical

Estimated Time

Less than 30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a flat surface before attempting to reset any lights.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder indicating oil change is due
•Oil life percentage displayed at 0%
•No other engine-related warning lights present

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Access the vehicle's dashboard settings using the steering wheel controls.
3
Navigate to the 'Settings' menu on the display screen.
4
Select 'Vehicle' or 'Oil Life Reset' option in the settings.
5
Confirm the reset when prompted by the system.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key fob

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Access the vehicle's dashboard settings using the steering wheel controls.
3
Navigate to the 'Settings' menu on the display screen.
4
Select 'Vehicle' or 'Oil Life Reset' option in the settings.
5
Confirm the reset when prompted by the system.

Solution

1. Preparation

Gather necessary tools: none required, just the vehicle key fob.
Ensure the vehicle is parked on a level surface and the engine is off.

2. Access the Dashboard

Insert the key fob into the ignition and turn to the "On" position without starting the engine.
Wait for the dashboard lights to illuminate fully.

3. Reset Oil Change Light

Use the steering wheel controls:
- Press the "OK" button on the right side of the steering wheel to access the menu.
- Scroll using the arrow keys until you see the "Settings" menu.
Select "Vehicle" from the settings options.
Scroll to find "Oil Life Reset" or "Reset Oil Life" option, and select it.
Follow on-screen prompts to confirm the reset.

4. Verification

Turn the ignition off and then back on to verify the oil change light is no longer illuminated.
Check the oil life percentage to ensure it reflects 100%.