how to reset the service light on Ford Explorer Sixth Generation (2020-present)

Ford Explorer Sixth Generation (2020-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

371 words

Problem Statement

Learn how to reset the service light on a 2020-present Ford Explorer. Step-by-step guide with diagnostic procedures and reset instructions.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing these steps.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminders still appearing after service
•No engine performance issues related to the service light

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Observe the service light to see if it turns off.
4
If the light remains on, use the vehicle's settings menu to navigate to the 'Vehicle' settings.
5
Select 'Oil Life Reset' or similar option based on the specific system of the vehicle.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this process.

Parts Required

•None required for this process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Observe the service light to see if it turns off.
4
If the light remains on, use the vehicle's settings menu to navigate to the 'Vehicle' settings.
5
Select 'Oil Life Reset' or similar option based on the specific system of the vehicle.

Solution

1. Preparation

Gather necessary tools: none required for this process.
Ensure vehicle is in a safe, well-ventilated area.

2. Access Vehicle Settings

Turn the ignition to the "On" position without starting the engine.
Wait for the dashboard lights to fully illuminate.

3. Reset Service Light

Press the gas pedal three times within 10 seconds.
Look for the service light on the dashboard; if it has turned off, the reset is successful.
If the light remains illuminated, proceed to the vehicle settings:
- Use the infotainment system to navigate to "Settings."
- Select "Vehicle."
- Find and select "Oil Life Reset."
- Confirm the reset when prompted.

4. Finalizing

Turn off the ignition.
Start the engine to confirm that the service light is no longer illuminated.