FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common suspension problems in a 2022 Ford Explorer? - Ford Explorer
Home/Cars/Ford/Explorer/Sixth Generation (2020-present)/What are the common suspension problems in a 2022 Ford Explorer?

What are the common suspension problems in a 2022 Ford Explorer?

Ford Explorer Sixth Generation (2020-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
772 words

Problem Statement

Learn about common suspension problems in the 2022 Ford Explorer, including symptoms, diagnostic steps, and repair instructions.

Affected Component
suspension

Symptoms

  • •Uneven Tire Wear
  • •Poor Handling
  • •Excessive Noise
  • •Vibration
  • •Pulling to One Side

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Floor jack
  • •Jack stands
  • •Pry bar
  • •Torque wrench
  • •Socket set and wrenches
  • •Alignment tools
  • •Diagnostic scanner
  • •Tire pressure gauge

Additional Information

Affected Component
suspension
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Suspension Problems in a 2022 Ford Explorer

The 2022 Ford Explorer, being part of the sixth generation, may experience several common suspension issues. Below are the typical symptoms, diagnostic steps, tools required, and repair instructions for diagnosing and fixing these problems.

Common Symptoms of Suspension Problems
  1. Uneven Tire Wear: Tires show excessive wear on one side or in the center.
  2. Poor Handling: The vehicle feels unstable, sways excessively, or has a loose steering feel.
  3. Excessive Noise: Clunking, rattling, or squeaking noises from the suspension when driving over bumps.
  4. Vibration: Noticeable vibrations in the steering wheel or floorboard during driving.
  5. Pulling to One Side: The vehicle drifts or pulls to the left or right when driving straight.
Tools Required
  • Floor jack
  • Jack stands
  • Pry bar
  • Torque wrench
  • Socket set and wrenches
  • Alignment tools (if performing alignment)
  • Diagnostic scanner (for electronic suspension issues)
  • Tire pressure gauge
Repair Instructions

1. Replacing Worn Shock Absorbers/Struts

Symptoms: Excessive bouncing, noise, or poor handling.

Steps:

  1. Safety First: Park the vehicle on a level surface, engage the parking brake, and wear safety goggles.
  2. Lift the Vehicle: Use a floor jack to lift the vehicle and secure it with jack stands.
  3. Remove Wheel: Take off the wheel to access the suspension components.
  4. Disconnect the Strut:
    • Remove the bolts connecting the strut to the steering knuckle.
    • Disconnect any sway bar links if obstructing access.
  5. Remove Strut Assembly: Unbolt the strut assembly from the vehicle and remove it.
  6. Install New Strut: Position the new strut assembly in place and bolt it back to the vehicle, ensuring all bolts are torqued to specification.
  7. Reassemble: Reconnect sway bar links and steering knuckle. Reinstall the wheel.
  8. Lower the Vehicle: Remove jack stands and lower the vehicle.
  9. Perform Alignment: After replacement, have the vehicle's alignment checked and adjusted if necessary.

2. Ball Joint Replacement

Symptoms: Clunking noise during turns or when hitting bumps.

Steps:

  1. Lift the Vehicle: Use a floor jack and jack stands.
  2. Remove Wheel: Take off the wheel to access the suspension.
  3. Disconnect Components: Remove the nut from the ball joint and disconnect it from the control arm.
  4. Remove Ball Joint: Use a ball joint separator tool to detach the ball joint from the steering knuckle.
  5. Install New Ball Joint: Press the new ball joint into the control arm and secure it with the nut.
  6. Reassemble: Reconnect all components and reinstall the wheel.
  7. Lower the Vehicle: Remove jack stands and lower the vehicle.
  8. Alignment Check: Check alignment after replacement.

3. Control Arm Replacement

Symptoms: Vibration, clunking noise, or tire wear.

Steps:

  1. Lift the Vehicle: Use a floor jack and secure with jack stands.
  2. Remove Wheel: Take off the wheel.
  3. Disconnect Suspension Components: Remove bolts from the control arm, including any attached sway bar links and ball joints.
  4. Remove Control Arm: Take out the control arm from the vehicle.
  5. Install New Control Arm: Position the new control arm and secure it with the bolts to the chassis and suspension.
  6. Reassemble: Reconnect all other components removed.
  7. Lower the Vehicle: Remove jack stands and lower the vehicle.
  8. Alignment Check: Have the alignment checked.
Conclusion

Regular inspection and maintenance of the suspension system are crucial to ensure a safe and comfortable driving experience. If you experience any symptoms of suspension issues, following the above steps can help diagnose and repair the problem effectively. Always refer to the manufacturer’s service manual for specific torque specifications and procedures.