how to clear P0700 code in Ford F-150 12th Generation (2009-2014)

Solution

1. Preparation

• Gather tools and parts necessary for the repair.
• Ensure the vehicle is parked on a level surface with the engine off.
• Disconnect the battery to prevent electrical shorts.

2. Transmission Fluid Change

• Sub-steps:
  1. Raise the vehicle using jack stands for access to the transmission pan.
  2. Place a drain pan under the transmission pan.
  3. Remove the transmission pan bolts using a socket set and carefully lower the pan.
  4. Drain the old fluid completely and inspect the pan for metal shavings or debris.
  5. Replace the transmission filter if applicable (remove the filter and install a new one).
  6. Clean the gasket surfaces on the transmission pan and the body.
  7. Install a new gasket on the pan and reattach the pan, tightening the bolts to the manufacturer's torque specification (typically 8-10 ft-lbs).
  8. Refill the transmission with the appropriate fluid (check owner's manual for specifications).

3. Reset Transmission Control Module

• Sub-steps:
  1. Reconnect the battery terminals.
  2. Use the OBD-II scanner to clear the P0700 code and any other related codes from the system.
  3. Start the engine and let it run until it reaches operating temperature.
  4. Drive the vehicle under various conditions to ensure the transmission operates smoothly.