FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ford/F-150/12th Generation (2009-2014)/how to fix P0710 code on Ford F-150 12th Generation (2009-2014)

how to fix P0710 code on Ford F-150 12th Generation (2009-2014)

Ford F-150 12th Generation (2009-2014)

Error Codes
Severity: highDifficulty: mediumError Code: P07102-4 hours
3 min read
551 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0710 transmission issue in Ford F-150 (2009-2014). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0710
Affected Component
Transmission
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect battery before working on electrical systems.
  • ⚠Allow engine to cool before opening the transmission.

Symptoms

  • •Check engine light illuminated
  • •Erratic shifting or harsh transmission behavior
  • •Transmission overheating
  • •Poor fuel economy
  • •Delayed shifting during acceleration

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0710 code and check for any related codes.
  2. 2Inspect the Transmission Fluid Temperature (TFT) sensor wiring and connectors for any damage or corrosion.
  3. 3Measure the resistance of the TFT sensor at various temperatures using a multimeter to verify proper operation.
  4. 4Check the transmission fluid level and condition; ensure it is at the correct level and is not burnt or contaminated.
  5. 5Inspect the Vehicle Speed Sensor (VSS) as it may affect transmission operation and could be related to the issue.
  6. 6Review the vehicle’s service history for any previous transmission repairs or fluid changes that could have impacted the sensor.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to ensure safety.
  • Allow the engine to cool before starting work.

2. Inspect the TFT Sensor and Wiring

  • Tools Required: Multimeter, socket set, electrical contact cleaner.
  • Check the TFT sensor wiring harness for frays or breaks.
  • Disconnect the sensor connector and clean it with electrical contact cleaner.
  • Reconnect the sensor and ensure a snug fit.

3. Replace the TFT Sensor (if necessary)

  • Tools Required: Socket set, torque wrench, new TFT sensor.
  • Locate the TFT sensor on the transmission.
  • Remove the sensor by unscrewing it (typically requires a socket wrench).
  • Install the new TFT sensor by threading it into place and tightening it to the manufacturer's specified torque (usually around 12-15 ft-lbs).

4. Refill Transmission Fluid (if necessary)

  • Tools Required: Funnel, transmission fluid (check owner’s manual for specifications).
  • If the fluid level is low, refill the transmission with the recommended fluid type.
  • Check for any leaks around the sensor and ensure that the fluid is at the correct level.

5. Clear the Code

  • Reconnect the battery and use an OBD-II scanner to clear the P0710 code.
  • Take the vehicle for a short test drive to ensure that the code does not reappear.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Funnel
  • •Electrical contact cleaner

Parts Required

  • •Transmission Fluid Temperature (TFT) sensor
  • •Transmission fluid

Additional Information

Error Code
P0710
Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
2 items

Related Faults

  1. my Ford F-150 12th Generation (2009-2014) has a strange noise coming from the front end

    Learn how to diagnose and fix strange noises from the front end of your Ford F-150 12th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  2. why does my Ford F-150 12th Generation (2009-2014) vibrate at certain speeds?

    Learn how to diagnose and fix vibrations in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Suspension5 symptoms

  3. my Ford F-150 12th Generation (2009-2014) stalls when I come to a stop why

    Learn how to diagnose and fix engine stalling issues in Ford F-150 12th Generation (2009-2014). Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  4. how to diagnose a fuel pump issue in Ford F-150 12th Generation (2009-2014)

    Learn how to diagnose and fix fuel pump issues in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Fuel System6 symptoms

  5. my Ford F-150 12th Generation (2009-2014) transmission fluid smells burnt, what now?

    Learn how to diagnose and fix burnt transmission fluid issues in Ford F-150 12th Generation (2009-2014). Step-by-step guide with symptoms and solutions.

    Transmission6 symptoms

  6. my Ford F-150 12th Generation (2009-2014) engine light is flashing, what to do?

    Learn how to diagnose and fix a flashing engine light on a Ford F-150 12th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine6 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation