how to reset the oil change light on my Ford F-150 12th Generation (2009-2014)?

Ford F-150 12th Generation (2009-2014)

Error Codes

Less than 10 minutes

Time

easy

Difficulty

low

Severity

2 min read

373 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 12th Generation (2009-2014) with this quick and easy guide. Step-by-step instructions included.

Affected Component

Electrical

Estimated Time

Less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stable position before attempting to reset the oil change light.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder message displayed
•Vehicle owner has completed an oil change

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Press the gas pedal three times within five seconds.
3
Observe if the oil change light turns off after the third pedal press.
4
If the light remains on, repeat the process to ensure it was executed correctly.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather the necessary tools: none required for the reset.
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Turn On the Ignition

Insert the key into the ignition or press the start button to turn the vehicle to the "On" position without starting the engine.
Confirm that all dashboard lights, including the oil change light, are illuminated.

3. Reset the Oil Change Light

Firmly press the gas pedal down three times within five seconds.
Watch the dashboard display for the oil change light to turn off after the third press.
If the light does not turn off, repeat the process.

4. Turn Off Ignition

Once the oil change light is confirmed off, turn the ignition back to the "Off" position.
Start the engine to verify that the oil change light remains off during operation.