how to fix C0050 error code on my Ford F-150 13th Generation (2015-2020)

Learn how to diagnose and fix C0050 error code on Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Solution

1. Preparation

• Gather all necessary tools and parts.
• Disconnect the battery to prevent electrical shorts.
• Allow the vehicle to cool if it has been recently driven.

2. Inspect and Repair Wiring

• Tools Required: Wire stripper, soldering iron, heat shrink tubing, multimeter.
• Inspect the wiring harness connected to the wheel speed sensor. Look for frayed wires or corrosion.
• If damaged, cut the wire, strip the ends, and splice in new wire using solder. Seal with heat shrink tubing.
• Check continuity with a multimeter to ensure proper connection.

3. Replace Wheel Speed Sensor

• Parts Required: New wheel speed sensor.
• Locate the wheel speed sensor on the affected wheel.
• Remove the wheel and tire for access.
• Unplug the electrical connector from the old wheel speed sensor.
• Remove the sensor using a socket set; it may require a specific torque to loosen.
• Install the new wheel speed sensor, ensuring it is seated properly, and torque it to the manufacturer's specifications.
• Reconnect the electrical connector.

4. Reconnect and Test

• Reconnect the battery.
• Clear the error codes using an OBD-II scanner.
• Conduct a test drive to ensure the ABS and traction control systems are functioning correctly.