how to fix P0011 code in Ford F-150 13th Generation (2015-2020)

Learn how to diagnose and fix P0011 code in Ford F-150 13th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Replace VVT Solenoid

• Tools Required: Socket set, torque wrench, ratchet, oil catch pan.
• Steps:
  1. Locate the VVT solenoid (usually found on the front or side of the engine).
  2. Remove the electrical connector from the solenoid.
  3. Unbolt the solenoid using the socket set.
  4. Remove the old solenoid and install the new one, ensuring it seats correctly.
  5. Torque the bolts to manufacturer specifications (typically around 89 in-lbs, check specific values).

3. Inspect and Replace Camshaft Phaser (if necessary)

• Tools Required: Camshaft holding tool, socket set, torque wrench.
• Steps:
  1. Remove any components blocking access to the camshaft phaser (timing cover, etc.).
  2. Use the camshaft holding tool to secure the camshaft.
  3. Unbolt the camshaft phaser and remove it from the camshaft.
  4. Install the new camshaft phaser, ensuring proper alignment.
  5. Torque the bolts to manufacturer specifications (typically around 15-30 ft-lbs, check specific values).

4. Change Engine Oil and Filter

• Tools Required: Oil filter wrench, socket set, oil catch pan.
• Steps:
  1. Drain the old engine oil into the oil catch pan.
  2. Replace the oil filter using the oil filter wrench.
  3. Refill with the recommended engine oil type (typically 5W-20 for F-150) to the proper level.

5. Reconnect Battery and Clear Codes

• Reconnect the negative battery terminal.
• Use the OBD-II scanner to clear the P0011 code and any other stored codes.