FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to repair Ford F-150 13th Generation fuel economy issues? - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/how to repair Ford F-150 13th Generation fuel economy issues?

how to repair Ford F-150 13th Generation fuel economy issues?

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
542 words

Problem Statement

Learn how to diagnose and repair fuel economy issues in Ford F-150 13th Generation. Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing any inspections or repairs on the fuel system.

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Decreased fuel economy (e.g., lower miles per gallon)
  • •Unusual engine noises
  • •Fuel odor around the vehicle
  • •Engine stalling or hesitation during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel pressure gauge
  • •Torque wrench
  • •Multimeter
  • •Basic hand tools

Parts Required

  • •Air filter
  • •Spark plugs
  • •Fuel filter (if needed)
  • •Fuel pump (if needed)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, socket set, fuel pressure gauge, torque wrench, multimeter, basic hand tools.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative battery terminal.
2. Address Engine Codes
  • If error codes are found, research each code to determine the specific repair needed.
  • Clear the codes and recheck to see if they return after repairs.
3. Replace Air Filter
  • Locate the air filter housing and remove the screws or clips.
  • Take out the old air filter and clean the housing.
  • Install a new air filter, ensuring it is seated properly, and reassemble the housing.
4. Inspect and Replace Spark Plugs
  • Remove the ignition coils or spark plug wires.
  • Use a spark plug socket to remove the old spark plugs.
  • Inspect the old plugs and replace them with new ones, ensuring the correct gap for the specific model.
  • Reinstall ignition coils or wires.
5. Check Fuel Pressure
  • Connect the fuel pressure gauge to the fuel rail.
  • Turn the ignition to the "on" position without starting the engine to check the pressure.
  • If the pressure is low, inspect and replace the fuel pump or fuel filter as necessary.
6. Inspect Exhaust System
  • Visually inspect the exhaust for any signs of blockage or damage.
  • If any damage is found, replace the affected components (e.g., catalytic converter, muffler).