how to reset the check engine light on a Ford F-150 13th Generation?

Solution

1. Preparation

• Gather the necessary tools: OBD-II scanner, owner's manual (for reference).
• Ensure that the vehicle is parked on a level surface and the engine is turned off.

2. Connect the OBD-II Scanner

• Locate the OBD-II port under the dashboard on the driver’s side.
• Plug the OBD-II scanner into the port.

3. Retrieve Error Codes

• Turn the ignition key to the "On" position without starting the engine (or press the start button without pressing the brake pedal if equipped).
• Follow the scanner's instructions to access and read any stored error codes.
• Note down any codes for your records.

4. Clear the Error Codes

• Use the scanner’s menu to find the option to "Clear Codes" or "Erase Codes."
• Confirm the action when prompted by the scanner.
• Disconnect the scanner once the codes are cleared.

5. Test the Vehicle

• Start the engine to check if the check engine light remains off.
• Drive the vehicle under normal conditions to ensure that the light does not reappear.