how to reset the check engine light on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

405 words

Problem Statement

Learn how to reset the check engine light on Ford F-150 (2015-2020). Step-by-step guide with diagnostic procedures and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the engine is off before connecting or disconnecting the OBD-II scanner.

Symptoms

•Check engine light illuminated
•No noticeable change in engine performance
•Recent repairs or maintenance performed
•Fault codes may still be present in the OBD-II system

Diagnostic Steps

1
Use an OBD-II scanner to check for any stored error codes.
2
Address any underlying issues indicated by the error codes before resetting the light.
3
Ensure all vehicle systems are functioning correctly before proceeding to reset the check engine light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual
•Notebook

Parts Required

•None for the reset operation.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools: OBD-II scanner, vehicle owner's manual, and a notebook to record any error codes.
Ensure the vehicle is parked on a level surface, and the engine is turned off.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard, near the driver's side.
Plug the OBD-II scanner into the port.

3. Read Error Codes

Turn the ignition key to the "On" position without starting the engine.
Follow the scanner's instructions to retrieve any stored error codes.
Record the codes and any associated descriptions for further reference.

4. Clear Error Codes

Use the scanner's menu to select the option to clear or reset error codes.
Confirm the action when prompted by the scanner.
Wait for the scanner to indicate that the codes have been successfully cleared.

5. Disconnect OBD-II Scanner

Remove the OBD-II scanner from the port.
Turn off the ignition.

6. Test Drive

Start the vehicle and drive for a short distance to ensure the check engine light remains off.