how to reset the tire pressure light on Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

457 words

Problem Statement

Learn how to reset the tire pressure light on Ford F-150 (2015-2020). Step-by-step guide with diagnostic steps and safety tips for proper tire maintenance.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when tires are cold for accurate readings.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible incorrect tire pressure readings on the vehicle display
•Vehicle may exhibit uneven tire wear if pressure is not corrected
•Driver may experience reduced fuel efficiency due to improper tire pressures

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge.
2
Inflate or deflate tires to the recommended pressure listed on the driver's door jamb.
3
Turn the vehicle to the 'On' position without starting the engine.
4
Locate the TPMS reset button, usually found beneath the steering wheel or on the instrument panel.
5
Press and hold the TPMS reset button until the warning light blinks three times, then release.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor or tire inflator

Parts Required

•TPMS sensors (if replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge.
2
Inflate or deflate tires to the recommended pressure listed on the driver's door jamb.
3
Turn the vehicle to the 'On' position without starting the engine.
4
Locate the TPMS reset button, usually found beneath the steering wheel or on the instrument panel.
5
Press and hold the TPMS reset button until the warning light blinks three times, then release.

Solution

1. Preparation

Tools Required: Tire pressure gauge, air compressor or tire inflator, TPMS reset button (if applicable).
Ensure all tires are at the recommended pressure before proceeding.
Safety Warning: Always check tire pressures when tires are cold for accurate readings.

2. Reset the TPMS

Turn the Ignition On
- Insert the key and turn the ignition to the "On" position without starting the engine.
Locate the TPMS Reset Button
- Find the TPMS reset button, which is typically located under the steering column or on the dashboard.
Press and Hold the Reset Button
- Press and hold the TPMS reset button until the tire pressure warning light blinks three times, indicating the TPMS is resetting.
Release the Button
- Once the light blinks three times, release the button. The light should turn off after a few moments if the reset was successful.
Start the Engine
- Start the vehicle and allow it to run for a few minutes. The tire pressure light should remain off if all tires are at the correct pressure.