how to reset the tire pressure light on my Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

434 words

Problem Statement

Learn how to reset the tire pressure light on your Ford F-150 13th Generation (2015-2020) with this step-by-step guide. Ensure safety and proper tire maintenance.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure all tires are properly inflated before performing the reset to prevent driving issues.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible uneven tire wear
•Changes in vehicle handling or ride comfort
•Fluctuations in tire pressure readings (if checked)

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge to ensure they are within the manufacturer's recommended range.
2
Inspect each tire for visible damage, punctures, or abnormal wear.
3
Verify that the spare tire (if equipped with a TPMS sensor) is also at the correct pressure.
4
Confirm that the TPMS sensors are functioning properly by using a TPMS tool if available.
5
Review the vehicle owner’s manual for specific reset instructions tailored to the model.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge

Parts Required

•None required for resetting, but consider TPMS sensors if faulty.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge to ensure they are within the manufacturer's recommended range.
2
Inspect each tire for visible damage, punctures, or abnormal wear.
3
Verify that the spare tire (if equipped with a TPMS sensor) is also at the correct pressure.
4
Confirm that the TPMS sensors are functioning properly by using a TPMS tool if available.
5
Review the vehicle owner’s manual for specific reset instructions tailored to the model.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
All tires should be inflated to the recommended pressure.
Gather necessary tools such as a tire pressure gauge.

2. Reset the TPMS

Turn on the Ignition
- Insert the key and turn it to the "On" position without starting the engine.
Locate the TPMS Reset Button
- The TPMS reset button is usually found beneath the steering column or near the driver's side door.
Press and Hold the Reset Button
- Press and hold the TPMS reset button until the TPMS indicator blinks three times, then release it.
Start the Engine
- Start the engine and let it run for about 20 minutes to allow the system to recalibrate.

3. Verify the Reset

After the engine has been running, turn it off and restart to ensure the TPMS light remains off.