my Ford F-150 13th Generation (2015-2020) vibrates at high speeds what's causing it

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

494 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix vibrations at high speeds in your Ford F-150 (2015-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is securely lifted before performing any work.

Symptoms

•Vibrations felt in the steering wheel or seats at speeds above 55 mph
•Uneven tire wear
•Steering wheel shaking or pulling to one side
•Increased noise from the tires or drivetrain
•Possible loss of vehicle control during vibrations
•Check tire pressure warning light may illuminate

Diagnostic Steps

1
Inspect tire pressure and adjust to manufacturer's specifications.
2
Visually inspect tires for uneven wear, bulges, or damage.
3
Check wheel balance using a tire balance machine.
4
Examine suspension components for wear or damage.
5
Inspect the driveshaft for any signs of damage or misalignment.
6
Check for worn or damaged CV joints or universal joints.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•Tire pressure gauge
•Wheel balancing machine

Parts Required

•New tires (if damaged)
•Wheel weights for balancing
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure and adjust to manufacturer's specifications.
2
Visually inspect tires for uneven wear, bulges, or damage.
3
Check wheel balance using a tire balance machine.
4
Examine suspension components for wear or damage.
5
Inspect the driveshaft for any signs of damage or misalignment.
6
Check for worn or damaged CV joints or universal joints.

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, torque wrench, tire pressure gauge.
Ensure the vehicle is on a flat surface and the engine is off.
Disconnect the battery if necessary for safety.

2. Tire Inspection and Adjustment

Sub-steps:
1. Check tire pressure using a tire pressure gauge and inflate to the recommended PSI.
2. Inspect each tire for uneven wear patterns, cracks, or bulges.
3. Replace any damaged tires if necessary.

3. Wheel Balancing

Sub-steps:
1. Remove the wheels using a lug wrench.
2. Take the wheels to a tire shop or use a wheel balancing machine.
3. Add weights as needed to balance the wheels according to specifications.
4. Reinstall the wheels and torque lug nuts to the manufacturer's specifications (typically 100-150 ft-lbs).

4. Suspension and Drivetrain Inspection

Sub-steps:
1. Inspect suspension components including shocks, struts, and bushings for wear.
2. Check driveshaft alignment and inspect for any signs of wear or damage.
3. Inspect CV joints and U-joints for play or damage and replace if necessary.

5. Test Drive

After completing repairs, perform a test drive to confirm the vibrations are resolved.