what causes P0700 code in Ford F-150 13th Generation (2015-2020)

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

528 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission fault in Ford F-150 (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on the transmission components.

Symptoms

•Check engine light illuminated
•Rough shifting or harsh transmission behavior
•Transmission overheating
•Delay in engagement when shifting from park to drive
•Erratic speedometer readings
•Loss of power during acceleration

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve additional codes related to the transmission.
2
Inspect transmission fluid levels and condition (check for signs of contamination or burnt smell).
3
Examine wiring harness and connectors to the transmission control module (TCM) for damage or corrosion.
4
Test the transmission control module (TCM) for proper operation using a multimeter.
5
Check for any stored codes in the TCM that may provide more specific diagnostic information.
6
Inspect the vehicle for any recent repairs that may have affected the transmission system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Transmission fluid pump

Parts Required

•Transmission fluid
•Transmission filter (if applicable)
•Transmission control module (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve additional codes related to the transmission.
2
Inspect transmission fluid levels and condition (check for signs of contamination or burnt smell).
3
Examine wiring harness and connectors to the transmission control module (TCM) for damage or corrosion.
4
Test the transmission control module (TCM) for proper operation using a multimeter.
5
Check for any stored codes in the TCM that may provide more specific diagnostic information.
6
Inspect the vehicle for any recent repairs that may have affected the transmission system.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery cable to prevent any electrical shorts.

2. Inspect and Replace Transmission Fluid

Remove the transmission dipstick and check the fluid level.
If low, add the recommended transmission fluid (consult owner's manual for specifications).
If the fluid is discolored or has a burnt smell, proceed to replace the fluid.
Drain the old transmission fluid using a drain pan and remove the transmission pan if necessary.
Replace the transmission filter if applicable.
Fill the transmission with new fluid using a funnel, ensuring the correct type and quantity.

3. Repair or Replace TCM

If the TCM is found defective in the diagnostic steps, carefully remove it by disconnecting the wiring harness and unbolting it from its mount.
Install the new or repaired TCM by reversing the removal steps.
Ensure all connections are secure and properly seated.

4. Clear Trouble Codes

Reconnect the negative battery cable.
Use the OBD-II scanner to clear all trouble codes from the system.
Start the vehicle and check if the check engine light remains off.