FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford F-150 13th Generation (2015-2020) have a rough ride - Ford F-150
Home/Cars/Ford/F-150/13th Generation (2015-2020)/why does my Ford F-150 13th Generation (2015-2020) have a rough ride

why does my Ford F-150 13th Generation (2015-2020) have a rough ride

Ford F-150 13th Generation (2015-2020)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
516 words

Problem Statement

Discover how to diagnose and fix a rough ride in Ford F-150 13th Generation (2015-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Suspension
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always use jack stands when working under a vehicle.
  • •Wear appropriate safety gear to protect against debris and hazardous materials.

Symptoms

  • •Uneven tire wear
  • •Excessive bumps felt while driving
  • •Steering wheel vibrations
  • •Difficulty maintaining control on smooth roads
  • •Noise from the suspension over bumps

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Tire pressure gauge
  • •Wrench set
  • •Alignment tool
  • •Socket set
  • •Torque wrench

Parts Required

  • •New tires (if necessary)
  • •Replacement shocks/struts (if necessary)
  • •Alignment adjustments (if necessary)

Additional Information

Affected Component
Suspension
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the inspection and repair.
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Wear safety glasses and gloves for protection.
  • Tools Required:
    • Jack and jack stands
    • Tire pressure gauge
    • Wrench set
    • Alignment tool
2. Inspect and Inflate Tires
  • Remove the valve caps from all tires.
  • Use a tire pressure gauge to check the pressure; inflate to the manufacturer’s specifications if low.
  • Inspect each tire for bulges, cuts, or uneven wear. Replace any damaged tires.
3. Check and Adjust Wheel Alignment
  • Use an alignment tool to measure the angles of the wheels.
  • If out of specification, take the vehicle to a professional alignment shop or adjust using the alignment adjustment bolts.
  • Ensure all fasteners are tightened to the manufacturer's torque specifications.
4. Inspect and Replace Suspension Components
  • Lift the vehicle using a jack and secure it with jack stands.
  • Visually inspect shocks/struts for leaks, dents, or rust.
  • Check springs for cracks or corrosion.
  • If any components are worn or damaged, replace them with OEM or quality aftermarket parts.
  • Tools Required:
    • Socket set
    • Torque wrench
5. Reassemble and Lower the Vehicle
  • Reattach any components that were removed for inspection.
  • Ensure all bolts are tightened to the manufacturer’s specifications.
  • Remove jack stands and lower the vehicle carefully.