why does my Ford F-150 13th Generation (2015-2020) lose power when accelerating

Ford F-150 13th Generation (2015-2020)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

577 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover how to diagnose and fix loss of power during acceleration in Ford F-150 13th Generation (2015-2020). Step-by-step guide with symptoms and solutions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components
•Relieve fuel system pressure before disconnecting any fuel lines
•Allow the engine to cool before starting work

Symptoms

•Engine stalling when accelerating
•Hesitation during acceleration
•Check engine light illuminated
•Rough idle
•Decreased fuel efficiency
•Unusual noises from the engine compartment

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored diagnostic trouble codes (DTC)
2
Inspect the air filter for blockages or dirt that could restrict airflow
3
Check the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications
4
Examine the throttle body for carbon buildup or obstructions
5
Inspect the spark plugs for wear or fouling
6
Test the ignition coils for proper functionality using a multimeter

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Socket set
•Multimeter
•Throttle body cleaner
•Cleaning cloths

Parts Required

•Fuel filter
•Spark plugs
•Throttle body cleaner

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored diagnostic trouble codes (DTC)
2
Inspect the air filter for blockages or dirt that could restrict airflow
3
Check the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications
4
Examine the throttle body for carbon buildup or obstructions
5
Inspect the spark plugs for wear or fouling
6
Test the ignition coils for proper functionality using a multimeter

Solution

1. Preparation

Gather tools: OBD-II scanner, fuel pressure gauge, socket set, multimeter, throttle body cleaner, and cleaning cloths.
Disconnect the battery to ensure safety when working on electrical components.
Allow the engine to cool before starting work.

2. Clean the Throttle Body

Remove the air intake duct connected to the throttle body using a socket set.
Spray throttle body cleaner into the throttle body and use a soft cloth to wipe away carbon buildup.
Ensure the throttle plate opens and closes smoothly.
Reassemble the air intake duct and reconnect any sensors.

3. Replace Fuel Filter (if applicable)

Locate the fuel filter; refer to the owner’s manual for the specific location.
Relieve fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls.
Disconnect the fuel lines from the filter using the appropriate tools.
Install the new fuel filter in the same orientation as the old one and reconnect fuel lines.
Reinstall the fuel pump fuse and turn the ignition to the "ON" position to prime the fuel system.

4. Replace Spark Plugs

Remove the ignition coil covers (if applicable) using a socket set.
Disconnect the ignition coils and remove them to access the spark plugs.
Use a spark plug socket to remove the old spark plugs and install new ones, ensuring they are gapped according to manufacturer specifications.
Reinstall the ignition coils and covers.

5. Verify Fuel Pressure

Connect the fuel pressure gauge to the fuel rail.
Start the engine and observe the fuel pressure reading; it should be within the manufacturer's specified range.
If pressure is low, consider replacing the fuel pump.