FAULTBASE
NEWSASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ford/F-150/14th Generation (2021-2024)/how to fix P0301 misfire code in my Ford F-150 14th Generation (2021-2024)

how to fix P0301 misfire code in my Ford F-150 14th Generation (2021-2024)

Ford F-150 14th Generation (2021-2024)

Severity: highDifficulty: mediumError Code: P03012-4 hours
4 min read
648 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0301 cylinder 1 misfire in Ford F-150 14th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0301
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before working on it to prevent burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Loss of power during acceleration
  • •Engine stalling
  • •Increased fuel consumption
  • •Unusual engine noises (e.g., popping or backfiring)

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0301 code and check for any additional codes.
  2. 2Inspect the ignition system components including spark plug, ignition coil, and wiring for damage or wear.
  3. 3Check fuel injector operation at cylinder 1 using a noid light or audible click test.
  4. 4Perform a compression test on cylinder 1 to determine if there are mechanical issues (e.g., low compression).
  5. 5Inspect the air intake and vacuum lines for leaks that could affect cylinder performance.
  6. 6Examine the engine’s fuel pressure using a fuel pressure gauge to ensure it meets specifications.

Solution

Solution

1. Preparation

  • Gather tools: OBD-II scanner, socket set, torque wrench, noid light, compression tester, fuel pressure gauge, and safety goggles.
  • Disconnect the negative battery terminal to prevent electrical shorts.

2. Replace Spark Plug and Ignition Coil (if faulty)

  • Tools Required: Socket set, torque wrench, dielectric grease.
  • Remove the engine cover (if applicable) to access the ignition components.
  • Disconnect the ignition coil connector from cylinder 1.
  • Remove the ignition coil by unscrewing the mounting bolts and gently pulling it out.
  • Inspect the spark plug for wear; if it’s worn or fouled, remove it using a spark plug socket.
  • Install the new spark plug and torque it to the manufacturer's specification (usually around 13 lb-ft).
  • Apply dielectric grease to the inside of the ignition coil boot, then reinstall the ignition coil and secure it with the mounting bolts.
  • Reconnect the ignition coil connector.

3. Clean or Replace Fuel Injector (if faulty)

  • Tools Required: Noid light, fuel injector removal tool.
  • Disconnect the fuel injector connector.
  • Use a noid light to check if the injector is receiving the correct signal. If not, inspect wiring.
  • If the injector is faulty or clogged, remove it using the fuel injector removal tool.
  • Clean the injector with appropriate cleaner or replace it with a new one.
  • Reinstall the injector and reconnect the fuel connector.

4. Perform a Compression Test (if necessary)

  • Tools Required: Compression tester.
  • Remove the spark plug from cylinder 1.
  • Insert the compression tester into the spark plug socket.
  • Crank the engine for a few seconds and record the compression reading.
  • Compare the reading to the manufacturer's specifications. If it’s low, further investigation on engine internals is needed.

5. Reassemble and Reset Codes

  • Reconnect the battery terminal.
  • Clear the P0301 code using the OBD-II scanner.
  • Start the engine and monitor for any reoccurrence of the misfire.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Noid light
  • Compression tester
  • Fuel pressure gauge
  • Safety goggles

Parts Required

  • Spark plug (specific to vehicle)
  • Ignition coil (if faulty)
  • Fuel injector (if faulty)

Additional Information

Error CodeP0301
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

7 items

Parts

3 items

Related Faults

Discover similar issues

  1. why does my Ford F-150 Fourteenth Generation (2021-present) make a hissing noise

    Learn how to diagnose and fix a hissing noise in the 2021 Ford F-150. Step-by-step guide with diagnostic procedures and repair instructions.

    Component:Engine
    Symptoms
    • •Hissing noise audible during engine operation
    • •Noise may increase with acceleration
    • +{count} more

  2. why does my Ford F-150 14th Generation (2021-2024) ABS light stay on

    Learn how to diagnose and fix the ABS light issue on Ford F-150 14th Generation (2021-2024). Step-by-step guide with symptoms, diagnostic steps, and r...

    Component:Brakes
    Symptoms
    • •ABS warning light is illuminated on the dashboard
    • •Decreased braking performance, particularly during hard braking
    • +{count} more

  3. why is my Ford F-150 making a hissing sound under the hood

    Discover the causes of hissing sounds from your Ford F-150 engine and learn how to diagnose and repair the issue with our step-by-step guide.

    Component:Engine
    Symptoms
    • •Hissing or hissing sound from the engine bay
    • •Loss of engine power during acceleration
    • +{count} more

  4. why does my Ford F-150 14th Generation (2021-2024) engine hesitates when accelerating

    Learn how to diagnose and fix engine hesitation in Ford F-150 14th Generation (2021-2024). Step-by-step guide with symptoms, diagnostics, and solution...

    Component:Engine
    Symptoms
    • •Engine hesitates or stutters during acceleration
    • •Check engine light illuminated
    • +{count} more

  5. why does my Ford F-150 14th Generation (2021-2024) have a low brake pedal

    Learn how to diagnose and fix low brake pedal issues in Ford F-150 14th Generation (2021-2024). Step-by-step guide with diagnostic procedures and repa...

    Component:Brakes
    Symptoms
    • •Brake pedal feels spongy or sinks to the floor when pressed
    • •Reduced braking effectiveness
    • +{count} more

  6. my Ford F-150 14th Generation (2021-2024) won't go into gear, what's the issue?

    Learn how to diagnose and fix transmission issues in the 2021-2024 Ford F-150. Step-by-step guide with symptoms, diagnostic steps, and repair instruct...

    Component:Transmission
    Symptoms
    • •Transmission warning light illuminated
    • •Engine revs but no movement
    • +{count} more

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation