how to reset the oil change light on Ford F-150 14th Generation (2021-2024)

Ford F-150 14th Generation (2021-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

331 words

Problem Statement

Learn how to reset the oil change light on your 2021-2024 Ford F-150. Step-by-step guide for a quick and easy reset after an oil change.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode before performing this reset to prevent unintended movement.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder alert displayed on the information screen
•Engine oil change has recently been completed

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Press the 'Gas' pedal three times within 10 seconds.
3
Turn off the ignition.
4
Turn the ignition back to the 'On' position to verify the light has reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this reset procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked on a level surface and is in "Park" mode.

2. Access Vehicle Settings

Turn the ignition to the "On" position without starting the engine.
Wait for all vehicle systems to initialize.

3. Reset the Oil Change Light

Press the accelerator pedal three times within 10 seconds.
Make sure to press the pedal fully each time to ensure the system registers the action.
Turn off the ignition completely.

4. Verify Reset

Turn the ignition back to the "On" position.
Check the instrument cluster to confirm that the oil change light is no longer illuminated.