how to reset the oil change light on my Ford F-150 14th Generation (2021-2024)

Ford F-150 14th Generation (2021-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the oil change light on your Ford F-150 (2021-2024) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface and in 'Park' before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Message indicating 'Oil Change Required' or similar on the display
•No other performance issues related to oil change

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Press the 'Gas Pedal' three times within 10 seconds.
3
Turn the ignition off and then back to the 'Run' position.
4
Check if the oil change light is still illuminated.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None (this process does not involve replacement parts)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: key fob or ignition key.
Ensure all doors are closed and the vehicle is in a safe location.

2. Access the Ignition

Insert the key into the ignition or ensure the key fob is within the vehicle.

3. Reset the Oil Change Light

Step 1: Turn the ignition to the "On" position without starting the engine.
Step 2: Press the gas pedal three times quickly.
Step 3: Turn the ignition off after the third press.
Step 4: Turn the ignition back to the "On" position to check if the oil change light has been reset.

4. Confirmation

Start the engine to ensure the oil change light does not reappear.