my Ford F-150 14th Generation (2021-2024) has uneven brake pad wear is it a caliper issue

Solution

1. Preparation

• Gather necessary tools and parts. Ensure the vehicle is on a level surface and park it securely.
• Tools Required: Jack and jack stands, lug wrench, socket set, torque wrench, brake caliper tool, brake cleaner, and safety glasses.
• Safety Warnings: Always wear safety glasses when working on brakes and ensure the vehicle is securely lifted before working underneath.

2. Remove Wheel

• Loosen lug nuts slightly while the wheel is on the ground.
• Use the jack to lift the vehicle and secure it with jack stands.
• Remove the lug nuts completely and take off the wheel.

3. Inspect Brake Components

• Check the brake pads and rotors for wear patterns.
• If pads are worn unevenly, check caliper movement by removing the caliper.
• Inspect the caliper slides and ensure they are clean and lubricated. If they are seized, they should be replaced.

4. Replace Brake Pads (if necessary)

• Remove the caliper bolts using a socket wrench and lift the caliper off the rotor.
• Remove old brake pads from the caliper bracket.
• Apply brake grease to the back of the new pads and install them.
• Compress the caliper piston using a brake caliper tool to fit over the new pads.

5. Reassemble Components

• Reattach the caliper over the new pads and secure it with the caliper bolts, torquing them to the manufacturer specifications (usually around 20-25 ft-lbs).
• Replace the wheel and hand-tighten the lug nuts.

6. Lower Vehicle and Final Checks

• Lower the vehicle from the jack stands and remove the jack.
• Torque the lug nuts to the manufacturer's specifications (around 150-175 ft-lbs).
• Pump the brake pedal several times to ensure proper caliper function and pad seating.