my Ford F-150 14th Generation (2021-2024) is shaking when I brake

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is on a flat surface and secured with wheel chocks.
• Wear safety gloves and goggles.

2. Remove Wheel

• Loosen lug nuts slightly while vehicle is on the ground.
• Raise the vehicle with a jack and secure it with jack stands.
• Fully remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

• Inspect Brake Rotors:
  • Use a dial indicator to measure rotor runout.
  • If warped, replace rotors.
• Replace Brake Pads:
  • Remove the caliper by unbolting it (typically 2 bolts).
  • Slide out old brake pads and replace them with new ones.
  • Apply brake grease to the backing of the new pads.

4. Reassemble

• Reinstall the caliper and torque bolts to manufacturer specifications (usually around 25-35 ft-lbs).
• Replace the wheel and hand-tighten lug nuts.
• Lower the vehicle and fully tighten the lug nuts in a star pattern to the manufacturer’s specification (typically 100-150 ft-lbs).

5. Test Drive

• Conduct a test drive to ensure the shaking has been resolved and brakes function properly.

Tools Required:

• Jack and jack stands
• Lug wrench
• Dial indicator
• Torque wrench
• Brake cleaner
• Brake grease

Parts Required:

• Brake rotors (if warped)
• Brake pads (if worn)

Estimated Repair Time: 2-4 hours

Safety Warnings:

• Always ensure the vehicle is securely supported on jack stands before working underneath it.
• Allow brakes to cool before handling any components to avoid burns.