my Ford F-150 Fourteenth Generation (2021-present) shakes when I brake what should I check

Solution

1. Preparation

• Gather necessary tools and parts.
• Safely lift the vehicle using a jack and secure it with jack stands.
• Remove the wheel to access the braking system.

2. Inspect and Replace Brake Pads

• Sub-steps:
  • Remove the caliper bolts using a socket set.
  • Carefully slide off the caliper and secure it with a bungee cord to avoid hanging from the brake line.
  • Remove the old brake pads and inspect for uneven wear.
  • If worn, install new brake pads according to the manufacturer's specifications.
• Tools Required: Socket set, bungee cord, brake pad spreader.

3. Check and Resurface/Replace Brake Rotors

• Sub-steps:
  • Use a dial indicator to check rotors for warping; if warping exceeds manufacturer tolerances, replace or resurface the rotors.
  • If resurfacing, clean the rotor surfaces thoroughly after machining.
  • Reinstall the rotors or new rotors, ensuring they are properly seated.
• Tools Required: Dial indicator, rotor resurfacing machine (if applicable).

4. Inspect Suspension Components

• Sub-steps:
  • Visually check all suspension components for cracks or excessive wear.
  • Shake the wheel to check for play in bearings and bushings.
  • Replace any damaged components as necessary.
• Tools Required: Wrench set, pry bar.

5. Reassemble and Torque Components

• Sub-steps:
  • Reinstall the brake caliper and torque the bolts to the specified torque (usually around 20-25 ft-lbs).
  • Reattach the wheel and torque the lug nuts to the manufacturer’s specification (usually around 100-150 ft-lbs).
• Tools Required: Torque wrench.