FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Ford F-150 14th Generation (2021-2024) check engine light keep coming on - Ford F-150
Home/Cars/Ford/F-150/14th Generation (2021-2024)/why does my Ford F-150 14th Generation (2021-2024) check engine light keep coming on

why does my Ford F-150 14th Generation (2021-2024) check engine light keep coming on

Ford F-150 14th Generation (2021-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
536 words

Problem Statement

Learn how to diagnose and fix the check engine light issue in the 2021-2024 Ford F-150. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow the engine to cool before performing any inspections or repairs.

Symptoms

  • •Check engine light illuminated
  • •Engine running rough or misfiring
  • •Decreased fuel efficiency
  • •Unusual engine noises
  • •Poor acceleration or loss of power

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Oxygen sensor socket

Parts Required

  • •Replacement gas cap
  • •Spark plugs
  • •Ignition coils
  • •Oxygen sensors (if needed)
  • •Fuel filter (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Address Error Codes
  • Reconnect the OBD-II scanner and note the error codes displayed.
  • Research the specific codes to determine the associated components needing attention.
3. Inspect and Replace Components
  • Gas Cap: If the gas cap is found to be faulty, replace it with a new one.
  • Spark Plugs and Ignition Coils: Remove the ignition coils using a socket set. Inspect and replace worn spark plugs and ignition coils as needed. Torque to manufacturer specifications (typically 12-15 lb-ft for spark plugs).
  • Oxygen Sensors: If indicated by error codes, remove the oxygen sensor using an oxygen sensor socket and install a new one, ensuring it is torqued to manufacturer specifications (usually around 30 lb-ft).
4. Test Fuel System
  • Connect a fuel pressure gauge to the fuel rail and turn the ignition on without starting the engine. Ensure the pressure is within specification (usually around 30-45 psi for most F-150 models).
  • If pressure is low, inspect the fuel pump and filter for issues and replace as necessary.
5. Reconnect Battery
  • After all repairs, reconnect the negative battery terminal and clear any error codes using the OBD-II scanner.