FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset check engine light on Ford F-150 Fourteenth Generation (2021-present) - Ford F-150
Home/Cars/Ford/F-150/Fourteenth Generation (2021-present)/how to reset check engine light on Ford F-150 Fourteenth Generation (2021-present)

how to reset check engine light on Ford F-150 Fourteenth Generation (2021-present)

Ford F-150 Fourteenth Generation (2021-present)

Error Codes
30 minutes to 1 hour
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
428 words

Problem Statement

Learn how to reset the check engine light on a 2021-present Ford F-150. Step-by-step guide with diagnostic procedures and tools required.

Affected Component
Engine
Estimated Time
30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and the engine is off before connecting or disconnecting any components

Symptoms

  • •Check engine light illuminated on the dashboard
  • •No noticeable performance issues while driving
  • •Potential error codes stored in the engine control unit
  • •Engine running smoothly after repairs

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set

Parts Required

  • •Battery

Additional Information

Affected Component
Engine
Estimated Time
30 minutes to 1 hour
Difficulty
medium
Severity
medium
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, socket set.
  • Ensure the vehicle is parked on a flat surface and the engine is off.
2. Connect OBD-II Scanner
  • Locate the OBD-II port under the dashboard, usually near the driver's side.
  • Plug in the OBD-II scanner and turn on the vehicle's ignition (do not start the engine).
3. Clear the Codes
  • Follow the scanner's instructions to navigate to the 'Read Codes' section.
  • Once the codes are displayed, select the option to 'Erase Codes' or 'Clear Codes'.
  • Confirm the action and wait for the scanner to indicate that the codes have been erased.
4. Verify the Reset
  • Turn off the ignition and disconnect the OBD-II scanner.
  • Start the engine and check if the check engine light is off.
5. Reconnect Battery (if applicable)
  • If the light remains on, disconnect the negative battery terminal for about 15 minutes to reset the engine control unit (ECU).
  • Reconnect the terminal and ensure it is secure.