FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what does the P0302 code mean for my Ford F-150 Fourteenth Generation (2021-present)? - Ford F-150
Home/Cars/Ford/F-150/Fourteenth Generation (2021-present)/what does the P0302 code mean for my Ford F-150 Fourteenth Generation (2021-present)?

what does the P0302 code mean for my Ford F-150 Fourteenth Generation (2021-present)?

Ford F-150 Fourteenth Generation (2021-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Error Code: P0302
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
514 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Ford F-150. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow engine to cool before beginning repairs.

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Loss of power during acceleration
  • •Increased fuel consumption
  • •Engine stalling or hesitation

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Spark plug socket
  • •Fuel injector cleaner (if applicable)

Parts Required

  • •Spark plug for cylinder 2
  • •Ignition coil for cylinder 2 (if faulty)
  • •Fuel injector for cylinder 2 (if faulty)

Additional Information

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Disconnect the negative battery terminal to ensure safety.
2. Inspect and Replace Ignition Components

  1. Remove Ignition Coil:

    • Unscrew the bolts holding the ignition coil in place.
    • Gently pull the ignition coil out of the spark plug well.

  2. Replace Spark Plug:

    • Use a spark plug socket to remove the spark plug from cylinder 2.
    • Inspect the old spark plug for damage; replace with a new spark plug if necessary (gap to specification).
    • Install the new spark plug and torque to manufacturer specifications (typically around 13-15 lb-ft).

  3. Reinstall Ignition Coil:

    • Place the ignition coil back into the spark plug well.
    • Secure it with the bolts and reconnect the electrical connector.
3. Fuel Injector Inspection and Cleaning

  1. Remove Fuel Injector:

    • Disconnect the fuel line and electrical connector from the injector.
    • Remove the retaining clips and pull the injector out of the rail.

  2. Clean or Replace Injector:

    • If cleaning, use an appropriate fuel injector cleaner and follow the manufacturer's instructions.
    • If damaged, replace the injector with a new one.

  3. Reinstall Injector:

    • Insert the cleaned or new injector back into the fuel rail.
    • Reconnect the fuel line and electrical connector securely.
4. Final Checks
  • Reconnect the negative battery terminal.
  • Start the engine and allow it to idle to ensure smooth operation.