FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix my Ford Mustang S550 (2015-2023) when the dashboard keeps resetting? - Ford Mustang
Home/Cars/Ford/Mustang/S550 (2015-2023)/how to fix my Ford Mustang S550 (2015-2023) when the dashboard keeps resetting?

how to fix my Ford Mustang S550 (2015-2023) when the dashboard keeps resetting?

Ford Mustang S550 (2015-2023)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
546 words

Problem Statement

Learn how to diagnose and fix dashboard reset issues in Ford Mustang S550 (2015-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent short circuits.
  • •Ensure the vehicle is in 'Park' or neutral with the parking brake engaged while working on it.

Symptoms

  • •Dashboard display resets frequently
  • •Loss of trip data and settings
  • •Speedometer and other gauges drop to zero momentarily
  • •Error messages displayed on the screen
  • •Instrument panel lights flicker or turn off

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Electrical cleaner
  • •Fuse puller

Parts Required

  • •Replacement fuse (if necessary)
  • •Instrument cluster (if testing indicates failure)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, multimeter, socket set, torque wrench, electrical cleaner, and a fuse puller.
  • Ensure the vehicle is parked on a level surface with the engine off and the key removed from the ignition.
2. Inspect Battery and Connections
  • Sub-steps:
    • Open the hood and locate the vehicle battery.
    • Use a multimeter to measure the battery voltage; it should be around 12.6 volts or higher.
    • Tighten any loose battery terminals and clean any corrosion using a wire brush and electrical cleaner.
3. Check Fuses
  • Sub-steps:
    • Locate the fuse box, typically found in the engine compartment or under the dashboard.
    • Identify the fuse for the instrument cluster (refer to the owner's manual for the exact location).
    • Remove the fuse using a fuse puller; inspect it for signs of damage or failure.
    • Replace with a new fuse of the same amperage if needed, ensuring the fuse is seated properly.
4. Inspect Wiring Harness
  • Sub-steps:
    • Remove any panels necessary to access the wiring harness connected to the dashboard.
    • Visually inspect the connectors and wiring for any signs of damage, fraying, or corrosion.
    • Reconnect any loose connectors and secure the wiring harness properly.
5. Test Instrument Cluster
  • Sub-steps:
    • If the vehicle has a diagnostic mode, access it according to the owner’s manual instructions.
    • Run the instrument cluster test to observe if the gauges and lights respond appropriately.
    • If issues persist, consider replacing the instrument cluster.