FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Ford Mustang S550 (2015-2023) has poor fuel economy, what can I do? - Ford Mustang
Home/Cars/Ford/Mustang/S550 (2015-2023)/my Ford Mustang S550 (2015-2023) has poor fuel economy, what can I do?

my Ford Mustang S550 (2015-2023) has poor fuel economy, what can I do?

Ford Mustang S550 (2015-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
572 words

Problem Statement

Learn how to diagnose and fix poor fuel economy issues in your Ford Mustang S550 (2015-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the engine to cool before inspecting the exhaust system

Symptoms

  • •Check engine light illuminated
  • •Engine stalling or rough idle
  • •Loss of power during acceleration
  • •Unusual exhaust smoke or odor
  • •Decreased performance in fuel efficiency
  • •Increased frequency of refueling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Torque wrench
  • •Screwdrivers

Parts Required

  • •Air filter
  • •Spark plugs
  • •Ignition coils (if needed)
  • •Fuel filter (if applicable)
  • •Exhaust components (if needed)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Park the vehicle on a flat surface, engage the parking brake, and disconnect the battery to ensure safety.
2. Air Filter Inspection and Replacement
  • Locate the air filter housing.
  • Remove the clips or screws securing the air filter cover.
  • Take out the old air filter and inspect for dirt or damage.
  • Install a new, clean air filter, ensuring it fits snugly in the housing.
  • Reattach the air filter cover and secure it.
3. Fuel System Check
  • Connect the fuel pressure gauge to the fuel rail.
  • Turn the ignition to the "ON" position (do not start the engine) to check the fuel pressure.
  • Compare the reading with the manufacturer's specifications (typically between 30-45 psi for many Ford engines).
  • If pressure is low, check the fuel pump and replace if necessary.
4. Spark Plug Inspection and Replacement
  • Remove the ignition coil covers (if applicable).
  • Unplug the ignition coils and remove them using a socket set.
  • Extract the spark plugs using a spark plug socket; inspect for wear or carbon buildup.
  • Replace worn spark plugs with OEM or equivalent parts, ensuring proper torque (typically around 15 lb-ft).
  • Reinstall the ignition coils and covers.
5. Exhaust System Inspection
  • Visually inspect the exhaust system for any signs of leaks, especially at the joints.
  • If a blockage is suspected, remove the exhaust components (e.g., catalytic converter or muffler) for inspection.
  • Replace any damaged components with OEM parts.