FAULTBASE
NEWSASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Ford/Mustang/S650 (2024-Present)/how to diagnose and fix a suspension problem on my Ford Mustang S650 (2024-Present)

how to diagnose and fix a suspension problem on my Ford Mustang S650 (2024-Present)

Ford Mustang S650 (2024-Present)

Severity: highDifficulty: hard4-8 hours
3 min read
581 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix suspension issues on your Ford Mustang S650 (2024-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Component
Suspension
Repair Time
4-8 hours

Safety Warnings

  • ⚠Always disconnect the battery before working on any electronic components.
  • ⚠Allow the vehicle to rest on the ground before removing any suspension components to avoid injury.

Symptoms

  • •Excessive bouncing or swaying during driving
  • •Clunking or knocking noises when going over bumps
  • •Uneven tire wear patterns
  • •Vehicle pulling to one side while driving
  • •Steering wheel vibrations at certain speeds

Diagnostic Steps

  1. 1Inspect the vehicle visually for any broken or worn suspension components such as control arms, bushings, and struts.
  2. 2Perform a bounce test by pushing down on each corner of the vehicle; the vehicle should return to its original position without excessive bouncing.
  3. 3Check for fluid leaks around shock absorbers or struts which may indicate a failure.
  4. 4Use a tire pressure gauge to ensure all tires are inflated to the manufacturer's recommended pressure.
  5. 5Conduct a road test to assess handling, listen for abnormal noises, and check for alignment issues.

Solution

Solution

1. Preparation

  • Gather tools and parts required for the repair.
  • Ensure the vehicle is parked on a flat surface and engage the parking brake.
  • Tools Required: Jack and jack stands, socket set, torque wrench, impact gun, pry bar, and a multimeter (if electronic components are involved).

2. Raise the Vehicle

  • Use a jack to lift the vehicle and place jack stands securely under the chassis.
  • Ensure the vehicle is stable before working underneath.

3. Inspect and Replace Components

  • Control Arms and Bushings:

    • Remove the bolts securing the control arms using a socket set.
    • Inspect the bushings for wear; replace if cracked or deteriorated.
    • Install new control arms and bushings, tightening bolts to the manufacturer’s specified torque values.
  • Shock Absorbers/Struts:

    • Remove the upper mounting bolts of the strut assembly.
    • Unbolt the lower mounting points and remove the strut from the vehicle.
    • Replace with new struts, ensuring proper alignment with the mounting points.
    • Reinstall the upper and lower bolts, torqueing to manufacturer specifications.

4. Align the Suspension

  • After all components are replaced, perform a wheel alignment using an alignment machine to ensure proper handling and tire wear.
  • Adjust camber, caster, and toe settings according to the specifications for the Ford Mustang S650.

5. Final Inspection

  • Lower the vehicle and perform a final inspection of all replaced components.
  • Ensure all bolts are tightened and that there are no leaks or unusual noises upon testing.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • Jack and jack stands
  • Socket set
  • Torque wrench
  • Impact gun
  • Pry bar
  • Multimeter

Parts Required

  • Control arms
  • Bushings
  • Shock absorbers/struts

Additional Information

Component

Suspension

Repair Time

4-8 hours

Difficulty

hard

Severity

high

Tools

6 items

Parts

3 items

Related Faults

Discover similar issues

  1. why is my Ford Mustang S650 (2024-Present) making a grinding noise when turning

    Learn how to diagnose and fix grinding noise when turning in Ford Mustang S650. Step-by-step guide with diagnostic procedures and repair instructions.

    Component:Steering
    Symptoms
    • •Grinding noise when turning the steering wheel
    • •Difficulty steering or a feeling of resistance
    • +{count} more
  2. my Ford Mustang S650 (2024-Present) won't start and just clicks, what's wrong

    Learn how to diagnose and fix the no-start issue in your 2024 Ford Mustang S650. Step-by-step guide with symptoms, diagnostic steps, and solutions.

    Component:Electrical
    Symptoms
    • •Clicking noise when turning the ignition key
    • •No engine crank or turnover
    • +{count} more
  3. why does my Ford Mustang S650 (2024-Present) have a rough idle after warm-up

    Diagnose and fix rough idle issues in the 2024 Ford Mustang S650. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Component:Engine
    Symptoms
    • •Rough idle when the engine is warm
    • •Check engine light illuminated
    • +{count} more
  4. how to fix my Ford Mustang S650 (2024-Present) if the dashboard lights are not working?

    Learn how to diagnose and fix dashboard lights not working in a 2024 Ford Mustang S650. Step-by-step guide with diagnostic procedures and repair instr...

    Component:Electrical
    Symptoms
    • •Dashboard lights remain completely off
    • •Instrument cluster displays not illuminated
    • +{count} more
  5. why does my Ford Mustang S650 (2024-Present) infotainment screen go black?

    Learn how to diagnose and fix the black screen issue in the Ford Mustang S650 infotainment system. Step-by-step guide with diagnostic procedures and r...

    Component:Electrical
    Symptoms
    • •Infotainment screen intermittently turns black
    • •Loss of audio from the infotainment system
    • +{count} more
  6. how to diagnose a misfire in my Ford Mustang S650 (2024-Present) engine?

    P0301

    Learn how to diagnose and fix P0301 cylinder 1 misfire in Ford Mustang S650 (2024-Present). Step-by-step guide with diagnostic procedures and repair i...

    Component:Engine
    Symptoms
    • •Check engine light illuminated
    • •Rough idle or unstable engine performance
    • +{count} more

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation