how to fix the C0035 code on my Ford Mustang S650 (2024-Present)

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a level surface and engage the parking brake.
• Disconnect the battery by removing the negative terminal.

2. Remove the Wheel

• Use a jack to lift the front left side of the vehicle.
• Secure with jack stands.
• Remove the lug nuts using a socket set and take off the wheel.

3. Access the Wheel Speed Sensor

• Locate the left front wheel speed sensor mounted on the hub assembly.
• Disconnect the electrical connector by pressing the tab and pulling it apart.
• Remove the sensor mounting bolt using a ratchet and socket.

4. Inspect and Replace the Sensor

• Check the old sensor for signs of wear or damage.
• If damaged, install a new wheel speed sensor by reversing the removal steps:
  • Insert the new sensor into the hub and secure it with the mounting bolt. Torque to manufacturer specifications (typically around 8-10 Nm).
  • Reconnect the electrical connector until it clicks into place.

5. Reassemble and Reconnect

• Reinstall the wheel and hand-tighten the lug nuts.
• Lower the vehicle and torque the lug nuts to manufacturer specifications (typically around 100-110 lb-ft).
• Reconnect the battery.

6. Clear Codes and Test

• Use the OBD-II scanner to clear the C0035 code.
• Start the vehicle and perform a test drive to ensure the ABS and traction control lights do not reappear.