why does my Ford Mustang S650 (2024-Present) engine shake at idle

Ford Mustang S650 (2024-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

608 words

Problem Statement

Learn how to diagnose and fix engine shaking at idle in the 2024 Ford Mustang S650. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before beginning any repairs.

Symptoms

•Engine vibrations noticeable at idle
•Check engine light illuminated
•Rough idle or uneven RPM fluctuations
•Increased engine noise
•Possible loss of power during acceleration
•Unusual smells (such as fuel or burning oil)

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect engine mounts for signs of wear or damage.
3
Check the condition of spark plugs and ignition coils for misfiring.
4
Examine fuel injectors for blockage or malfunction.
5
Inspect the air intake system for leaks or obstructions.
6
Perform a compression test on each cylinder to check for internal engine issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack stands
•Spark plug socket
•Fuel injector cleaner

Parts Required

•Engine mounts
•Spark plugs
•Fuel injectors (if necessary)
•Air filter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect engine mounts for signs of wear or damage.
3
Check the condition of spark plugs and ignition coils for misfiring.
4
Examine fuel injectors for blockage or malfunction.
5
Inspect the air intake system for leaks or obstructions.
6
Perform a compression test on each cylinder to check for internal engine issues.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to prevent electrical shorts.
Allow the engine to cool down before beginning work.

2. Inspect and Replace Engine Mounts

Tools Required: Socket set, torque wrench, jack stands
Lift the vehicle using a jack and secure it with jack stands.
Locate the engine mounts and visually inspect for cracks or excessive wear.
If damaged, remove the bolts securing the engine mount to the engine and the frame.
Install new engine mounts and torque the bolts to manufacturer specifications (typically around 50-70 ft-lbs).
Lower the vehicle and reconnect the battery.

3. Check and Replace Spark Plugs

Tools Required: Spark plug socket, ratchet, torque wrench
Remove the ignition coils by unbolting them and disconnecting the electrical connectors.
Remove the spark plugs using the spark plug socket and inspect them for wear or deposits.
Replace with new spark plugs, torquing them to the specified value (usually around 13-20 ft-lbs).
Reinstall the ignition coils and ensure connections are secure.

4. Clean or Replace Fuel Injectors

Tools Required: Fuel injector cleaner, appropriate socket set
Remove the fuel rail to access the injectors.
Use a fuel injector cleaner or replace the injectors if they are clogged or malfunctioning.
Reassemble the fuel rail, ensuring all connections are secure and leak-free.

5. Inspect and Repair Air Intake System

Tools Required: Screwdriver set, vacuum gauge
Inspect the air filter and intake hoses for damage or blockages.
Replace the air filter if dirty and ensure there are no vacuum leaks in the hoses.
Reinstall all components securely.