my Genesis G70 shakes when I accelerate what could be wrong

Genesis G70 1st Gen (2018-Present)

Error Codes

4-6 hours

Time

medium

Difficulty

medium

Severity

3 min read

490 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

4-6 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported before working underneath.
•Disconnect the battery before working on electrical systems.

Symptoms

•Shaking or vibrations felt through the steering wheel and/or seat during acceleration
•Possible loss of power when accelerating
•Unusual noises, such as clunking or grinding
•Vibration intensity increases with speed
•Steering wheel may pull to one side

Diagnostic Steps

1
Inspect tires for uneven wear or damage.
2
Check wheel balancing and alignment.
3
Examine the driveshaft and CV joints for wear or damage.
4
Scan for error codes using an OBD-II scanner to check for engine or transmission issues.
5
Inspect engine and transmission mounts for wear or damage.
6
Test the suspension components for play or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Socket set
•Torque wrench
•Pry bar

Parts Required

•Replacement tires (if necessary)
•Driveshaft or CV joint (if damaged)
•Engine or transmission mounts (if worn)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear or damage.
2
Check wheel balancing and alignment.
3
Examine the driveshaft and CV joints for wear or damage.
4
Scan for error codes using an OBD-II scanner to check for engine or transmission issues.
5
Inspect engine and transmission mounts for wear or damage.
6
Test the suspension components for play or damage.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Tire Inspection and Balancing

Sub-steps:
1. Remove the wheel covers if applicable.
2. Inspect each tire for tread wear and damage (bulges, cuts).
3. Check tire pressure and inflate to the recommended PSI.
4. If tires are unevenly worn or damaged, replace as necessary.
5. Have the tires balanced and aligned by a professional.

3. Driveshaft and CV Joint Inspection

Sub-steps:
1. Lift the vehicle using a jack and secure with jack stands.
2. Inspect the driveshaft for any visible cracks or bends.
3. Check the CV joints for grease leaks or wear.
4. Replace any damaged components with OEM parts as necessary.

4. Engine and Transmission Mounts Inspection

Sub-steps:
1. Visually inspect the engine and transmission mounts for cracks or excessive wear.
2. Use a pry bar to check for movement in the mounts.
3. Replace any damaged mounts with OEM parts.

5. Suspension Component Check

Sub-steps:
1. Inspect control arms, bushings, and ball joints for wear or damage.
2. Shake each wheel to check for play, indicating worn components.
3. Replace any damaged suspension components.