my Genesis G70 stalls at red lights what can I do

Solution

1. Preparation

• Gather all necessary tools and parts.
• Disconnect the vehicle battery to ensure safety during repairs.
• Ensure the engine is cool.

2. Clean the Throttle Body

1. Remove Throttle Body:

   • Disconnect the throttle position sensor and any electrical connectors.
   • Remove the intake duct connected to the throttle body using a socket set.
   • Unbolt the throttle body from the intake manifold.

2. Clean the Throttle Body:

   • Use throttle body cleaner and a soft cloth or brush to gently clean the interior and the throttle plate.
   • Ensure no debris falls into the intake manifold during the cleaning process.

3. Reinstall Throttle Body:

   • Position the throttle body back onto the intake manifold and torque the bolts to the manufacturer’s specifications.
   • Reconnect the intake duct and electrical connectors.

3. Inspect and Replace Air Filter

1. Locate Air Filter Housing:

   • Open the hood and locate the air filter housing.

2. Remove Air Filter:

   • Unsnap or unbolt the air filter housing cover.
   • Remove the old air filter and check for dirt or damage.

3. Install New Air Filter:

   • Place the new air filter into the housing and secure the cover back in place.

4. Inspect and Replace Fuel Filter (if applicable)

1. Locate Fuel Filter:

   • Identify the fuel filter location in the vehicle (refer to the service manual).

2. Remove Fuel Filter:

   • Follow safety precautions to relieve fuel pressure.
   • Disconnect fuel lines from the filter and remove the filter.

3. Install New Fuel Filter:

   • Install the new fuel filter, ensuring correct orientation and secure connections.