how to fix P0302 code in Genesis G70 IG (2017-2023)

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the battery to prevent electrical shorts.
• Allow the engine to cool before starting work.

2. Remove Ignition Coil and Spark Plug

• Tools Required: Ratchet and socket set, torque wrench.
• Remove the engine cover if applicable.
• Disconnect the electrical connector from the ignition coil.
• Remove the ignition coil by unbolting it from the cylinder head.
• Use a spark plug socket to remove the spark plug from cylinder 2.

3. Inspect and Replace Components

• Inspect: Check the spark plug for fouling, wear, or damage. Look for cracks or excessive carbon buildup.
• Replace: If the spark plug is worn, install a new spark plug with the correct heat range as specified by the manufacturer.
• Replace Ignition Coil: If the ignition coil is defective, replace it with a new one.

4. Check Fuel Injector

• Tools Required: Noid light, multimeter (if necessary).
• Connect a noid light to the fuel injector connector to check for pulse signal while cranking the engine.
• If the noid light does not illuminate, inspect the wiring and connectors. Repair or replace as needed.
• If the injector is faulty, remove and replace the fuel injector for cylinder 2.

5. Reassemble and Connect Battery

• Reinstall the spark plug and ignition coil.
• Reconnect the electrical connector and any other components that were removed.
• Reconnect the battery.