how to fix the harsh shifting in my Genesis G70 IG (2017-2023)

Genesis G70 IG (2017-2023)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

579 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix harsh shifting issues in Genesis G70 (2017-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the engine is off and cool before starting work on the transmission.
•Use jack stands to support the vehicle securely when working underneath.

Symptoms

•Harsh or jerky shifting between gears
•Delayed engagement when shifting into drive or reverse
•Unusual noises during shifting (clunking or grinding)
•Engine RPMs fluctuating unexpectedly during gear changes
•Check engine light illuminated

Diagnostic Steps

1
Scan the vehicle’s computer system with an OBD-II scanner to check for any stored error codes.
2
Inspect the transmission fluid level and condition; look for signs of contamination or burnt smell.
3
Examine transmission mounts for signs of wear or damage.
4
Check the transmission control module (TCM) for proper operation and updates.
5
Test drive the vehicle to replicate the issue and note specific conditions (e.g., speed, temperature) when harsh shifting occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid funnel
•Fluid pump
•Socket set
•Torque wrench

Parts Required

•Manufacturer-recommended transmission fluid
•Transmission filter
•Gasket for the transmission pan

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s computer system with an OBD-II scanner to check for any stored error codes.
2
Inspect the transmission fluid level and condition; look for signs of contamination or burnt smell.
3
Examine transmission mounts for signs of wear or damage.
4
Check the transmission control module (TCM) for proper operation and updates.
5
Test drive the vehicle to replicate the issue and note specific conditions (e.g., speed, temperature) when harsh shifting occurs.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Wear safety gloves and glasses for protection.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid funnel, fluid pump, socket set, torque wrench.
Sub-steps:
1. Remove the transmission dipstick (if applicable) to check fluid level.
2. If fluid is low, add the manufacturer-recommended transmission fluid using a funnel.
3. If fluid is dirty or burnt, drain the old fluid using a fluid pump through the drain plug.
4. Replace with new transmission fluid according to the manufacturer’s specifications (check the owner's manual for type and capacity).
5. Recheck the fluid level after running the engine for a few minutes and adjust as necessary.

3. Inspect and Replace Transmission Filter

Tools Required: Socket set, torque wrench, gasket scraper.
Sub-steps:
1. Lift the vehicle securely using jack stands.
2. Remove the transmission pan bolts using a socket.
3. Carefully lower the transmission pan and remove the old filter.
4. Clean the pan and inspect for metal shavings or debris.
5. Install the new filter and reattach the transmission pan with a new gasket, torquing bolts to manufacturer specs.

4. Reprogram or Update TCM (if necessary)

Tools Required: OBD-II scanner with programming capability.
Sub-steps:
1. Connect the OBD-II scanner to the vehicle’s diagnostic port.
2. Follow the manufacturer’s instructions to check for updates to the TCM software.
3. Reprogram the TCM if updates are available or if adjustments are needed for harsh shifting.