FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Genesis/G70/IG (2017-2023)/how to fix the P0174 code on my Genesis G70 IG (2017-2023)?

how to fix the P0174 code on my Genesis G70 IG (2017-2023)?

Genesis G70 IG (2017-2023)

Error Codes
Severity: highDifficulty: mediumError Code: P01742-4 hours
4 min read
627 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0174 lean condition in Genesis G70 (2017-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Rough idle
  • •Reduced engine power
  • •Poor fuel economy
  • •Engine stalling during acceleration
  • •Increased emissions

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0174 and check for any additional codes.
  2. 2Inspect the air intake system for vacuum leaks, including hoses and gaskets.
  3. 3Check the mass airflow (MAF) sensor for dirt or damage and clean or replace it as necessary.
  4. 4Verify the operation of the fuel injectors by checking for proper fuel delivery.
  5. 5Examine the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications.
  6. 6Inspect the engine coolant temperature (ECT) sensor for proper operation.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety during repairs.
  • Allow the engine to cool if it has been running.

2. Inspect and Repair Vacuum Leaks

  • Tools Required: Vacuum gauge, socket set
  • Check all vacuum hoses and gaskets for cracks or disconnections.
  • Replace any damaged hoses or gaskets.
  • Reconnect any disconnected hoses securely.

3. Clean or Replace MAF Sensor

  • Tools Required: MAF sensor cleaner, screwdriver
  • Locate the MAF sensor in the air intake system.
  • Remove the MAF sensor from its housing.
  • Spray the sensor with MAF cleaner and let it dry completely.
  • If the sensor is damaged, replace it with a new one.

4. Check Fuel Pressure

  • Tools Required: Fuel pressure gauge
  • Locate the fuel pressure test port on the fuel rail.
  • Connect the fuel pressure gauge to the test port.
  • Turn the ignition to the ON position (without starting the engine) and check the pressure reading against manufacturer specifications.
  • If the pressure is low, inspect the fuel pump and fuel filter for issues, and replace as necessary.

5. Inspect Fuel Injectors

  • Tools Required: Multimeter, socket set
  • Check the resistance of each fuel injector using a multimeter.
  • If any injectors are out of specification, replace them.
  • Clean the fuel injectors with a cleaning kit if they are functioning but dirty.

6. Inspect ECT Sensor

  • Tools Required: Multimeter, socket set
  • Locate the ECT sensor and disconnect its electrical connector.
  • Measure the resistance of the sensor at various temperatures to ensure it is within specification.
  • Replace the ECT sensor if it is faulty.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Vacuum gauge
  • •Fuel pressure gauge
  • •MAF sensor cleaner
  • •Multimeter
  • •Socket set
  • •Screwdriver

Parts Required

  • •Vacuum hoses (if damaged)
  • •MAF sensor (if faulty)
  • •Fuel filter (if clogged)
  • •Fuel injectors (if defective)
  • •ECT sensor (if faulty)

Additional Information

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
5 items

Related Faults

  1. what causes my Genesis G70 to shake when I accelerate

    Learn how to diagnose and fix shaking during acceleration in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  2. why does my Genesis G70 brake pedal feel soft

    Learn how to diagnose and fix a soft brake pedal in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

    Brakes5 symptoms

  3. why does my Genesis G70 vibrate at highway speeds

    Learn how to diagnose and fix vibrations at highway speeds in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

    Suspension5 symptoms

  4. why does my Genesis G70 engine make a pinging sound

    Learn how to diagnose and fix engine pinging sound in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

  5. why does my Genesis G70 have a strange smell coming from the vents?

    Learn how to diagnose and fix strange smells from the vents in your Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

    HVAC5 symptoms

  6. why does my Genesis G70 make a hissing noise under the hood

    Learn how to diagnose and fix a hissing noise under the hood of your Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

    Engine5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation