how to fix the P0720 code in my Genesis G70 IG (2017-2023)

Genesis G70 IG (2017-2023)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

Error Code: P0720

3 min read

446 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0720 vehicle speed sensor issues in Genesis G70 (2017-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0720

Affected Component

Transmission

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on the transmission area.

Symptoms

•Check engine light illuminated
•Erratic speedometer readings
•Transmission shifting issues
•Engine stalling or rough idling during gear changes
•Poor fuel economy

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0720 and check for any related codes.
2
Inspect the vehicle speed sensor wiring and connectors for damage, corrosion, or loose connections.
3
Test the vehicle speed sensor output with a multimeter to ensure it is functioning properly.
4
Check the vehicle’s speedometer operation to confirm if it is receiving correct signals from the VSS.
5
Inspect the transmission fluid level and condition, as low or dirty fluid can affect sensor performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Torque wrench

Parts Required

•Replacement vehicle speed sensor

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0720 and check for any related codes.
2
Inspect the vehicle speed sensor wiring and connectors for damage, corrosion, or loose connections.
3
Test the vehicle speed sensor output with a multimeter to ensure it is functioning properly.
4
Check the vehicle’s speedometer operation to confirm if it is receiving correct signals from the VSS.
5
Inspect the transmission fluid level and condition, as low or dirty fluid can affect sensor performance.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the negative battery terminal to ensure safety.

2. Remove Vehicle Speed Sensor

Locate the vehicle speed sensor, typically found on the transmission.
Use a socket set to remove the mounting bolts securing the sensor.
Carefully disconnect the electrical connector from the sensor.

3. Inspect and Replace Sensor

Visually inspect the old sensor for damage or wear.
If the sensor is faulty, replace it with a new one.
Ensure the replacement sensor matches the OEM specifications.

4. Reinstall Sensor

Position the new vehicle speed sensor in place.
Reattach the electrical connector securely.
Reinstall the mounting bolts and torque them to the manufacturer’s specifications (typically around 7-10 ft-lbs).

5. Reconnect Battery and Test

Reconnect the negative battery terminal.
Start the engine and allow it to idle.
Clear the trouble codes using the OBD-II scanner and test drive the vehicle to see if the issue is resolved.