FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the power mirrors not working on my Genesis G70 IG (2017-2023)? - Genesis G70
Home/Cars/Genesis/G70/IG (2017-2023)/how to fix the power mirrors not working on my Genesis G70 IG (2017-2023)?

how to fix the power mirrors not working on my Genesis G70 IG (2017-2023)?

Genesis G70 IG (2017-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
499 words

Problem Statement

Learn how to diagnose and fix power mirrors not working on Genesis G70 (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid shock.

Symptoms

  • •Power mirror switch does not respond
  • •Mirrors do not move in any direction
  • •No sound or clicking when attempting to adjust mirrors
  • •Other electrical components in the door function normally
  • •Check engine light may be illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Multimeter
  • •Trim removal tools
  • •OBD-II scanner
  • •Fuse puller

Parts Required

  • •Power mirror switch (if faulty)
  • •Mirror motor (if faulty)
  • •Fuse (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: socket set, multimeter, trim removal tools, OBD-II scanner.
  • Disconnect the vehicle battery to prevent electrical shock.
2. Inspect and Replace the Power Mirror Switch
  • Tools Required: Trim removal tool, socket set
  • Remove the door panel using trim removal tools to access the power mirror switch.
  • Disconnect the electrical connector from the power mirror switch.
  • Test the switch using a multimeter; it should show continuity when pressed.
  • If faulty, replace the switch with a new one.
  • Reconnect the door panel and battery.
3. Inspect and Replace the Mirror Motor
  • Tools Required: Socket set, multimeter
  • Remove the door panel again if it was previously removed.
  • Disconnect the wiring harness from the mirror motor.
  • Test the motor with a multimeter by applying direct voltage from a battery.
  • If the motor does not respond, replace it with a new mirror motor.
  • Reassemble the door panel and reconnect the battery.
4. Check and Replace Fuses
  • Tools Required: Fuse puller, multimeter
  • Locate the fuse box and check the fuse related to the power mirrors (refer to the owner's manual for the specific fuse location).
  • If the fuse is blown, replace it with one of the same amperage.
  • Test the mirrors after replacing the fuse.