how to replace the cabin air filter on Genesis G70 IG (2017-2023)

Genesis G70 IG (2017-2023)

Error Codes

30 minutes - 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

571 words

Problem Statement

Step-by-step guide to replacing the cabin air filter in Genesis G70 IG (2017-2023). Improve airflow and eliminate odors with this easy DIY fix.

Affected Component

HVAC

Estimated Time

30 minutes - 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid short circuits.

Symptoms

•Reduced airflow from the climate control system
•Unpleasant odors when using the air conditioning or heating
•Increased dust accumulation inside the vehicle
•Frequent allergy symptoms for passengers
•Visible dirt or debris in the filter upon inspection

Diagnostic Steps

1
Inspect the climate control system for airflow issues by setting it to maximum and listening for fan operation.
2
Verify the presence of any odors or unusual smells when the climate control is engaged.
3
Check the existing cabin air filter for dirt, debris, and overall condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver or trim removal tool
•Replacement cabin air filter

Parts Required

•New cabin air filter compatible with Genesis G70 IG (2017-2023)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the ignition is off.
Disconnect the vehicle battery if necessary to avoid any electrical issues.

2. Accessing the Cabin Air Filter

Locate the Filter Compartment:
- Open the glove compartment.
- Remove any contents from the glove box.
- Locate the two stoppers on the sides of the glove box to allow it to drop down further.
Remove the Glove Box:
- Press in on the sides of the glove box to release the stops and allow it to swing down completely.
- Disconnect the damper arm (if equipped) to fully remove the glove box.

3. Remove the Old Cabin Air Filter

Locate the Filter Cover:
- Find the cabin air filter cover, which is typically located behind the glove compartment.
Open the Filter Compartment:
- Release the clips or screws holding the cover in place.
- Carefully remove the cover to expose the cabin air filter.
Take Out the Old Filter:
- Pull the old cabin air filter straight out of the compartment.
- Note the orientation of the filter for proper installation of the new filter.

4. Install the New Cabin Air Filter

Insert the New Filter:
- Take the new cabin air filter and insert it into the compartment, ensuring it is oriented correctly based on the airflow direction indicated on the filter.
Reattach the Filter Cover:
- Secure the cover back onto the filter compartment, ensuring all clips or screws are properly fastened.

5. Reassemble the Glove Box

Reattach the Glove Box:
- Lift the glove box back into position and secure the damper arm if applicable.
- Snap the glove box back into place by pressing in the sides until the stops are engaged.
Replace Contents:
- Place all items back into the glove compartment.