how to reset the maintenance light on my Genesis G70 IG (2017-2023)

Genesis G70 IG (2017-2023)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

382 words

Problem Statement

Learn how to reset the maintenance light on your Genesis G70 (2017-2023) with this step-by-step guide. Ensure your vehicle's alerts are cleared after maintenance.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual) before starting the reset process.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Service reminder notification persists after completing maintenance
•Inability to clear maintenance alerts through normal driving

Diagnostic Steps

1
Turn on the ignition without starting the engine (position II).
2
Navigate to the 'Settings' menu on the instrument cluster display.
3
Select 'Service Interval' or 'Maintenance' settings.
4
Locate the option to reset the maintenance light.
5
Confirm the reset action when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob or ignition key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is in a safe location.
Have the vehicle key fob ready to access the ignition.

2. Access the Ignition

Insert the key fob into the ignition slot (if applicable) or have it within the vehicle.
Press the start button without pressing the brake pedal to turn on the ignition.

3. Navigate to the Maintenance Settings

Use the steering wheel controls to access the menu on the instrument cluster.
Scroll to "Settings" using the directional buttons.
Select "Service Interval" or "Maintenance" from the settings options.

4. Reset the Maintenance Light

Find the option labeled "Reset" or "Maintenance Light Reset."
Press the "Enter" button and confirm the reset when prompted.
Wait for a confirmation message indicating that the maintenance light has been reset successfully.

5. Turn Off the Ignition

Press the start button again to turn off the ignition.
Remove the key fob from the ignition slot (if applicable).