my Genesis G70 has condensation on the inside of the windshield, why?

Genesis G70 IG (2017-2023)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

540 words

Problem Statement

Learn how to diagnose and fix condensation inside the windshield of your Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

HVAC

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the engine is off and cool before working on the HVAC system.

Symptoms

•Fogging of the windshield during temperature changes
•Moisture on interior surfaces
•Unpleasant odors indicating mold or mildew
•Water pooling in the footwells or under seats
•Reduced visibility while driving

Diagnostic Steps

1
Inspect the cabin air filter for dirt or blockages.
2
Check for wet carpets or moisture in the footwells.
3
Examine door seals and window seals for damage or wear.
4
Inspect the HVAC system for proper operation, including the defrost function.
5
Use an OBD-II scanner to check for any related trouble codes, especially related to the HVAC system.
6
Look for any signs of coolant leaks inside the vehicle, which could indicate a leaking heater core.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vacuum cleaner
•Microfiber cloths
•OBD-II scanner
•Flathead screwdriver

Parts Required

•Replacement cabin air filter
•Replacement door/window seals (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the cabin air filter for dirt or blockages.
2
Check for wet carpets or moisture in the footwells.
3
Examine door seals and window seals for damage or wear.
4
Inspect the HVAC system for proper operation, including the defrost function.
5
Use an OBD-II scanner to check for any related trouble codes, especially related to the HVAC system.
6
Look for any signs of coolant leaks inside the vehicle, which could indicate a leaking heater core.

Solution

1. Preparation

Gather tools: vacuum cleaner, microfiber cloths, OBD-II scanner, flathead screwdriver, replacement cabin air filter (if needed).
Ensure the vehicle is parked in a dry area and the engine is off.

2. Clean the Windshield

Use a glass cleaner and microfiber cloth to clean the inside of the windshield thoroughly to remove any residues that may contribute to fogging.

3. Replace Cabin Air Filter

Tools Required: Flathead screwdriver, replacement cabin air filter.
Steps:
1. Locate the cabin air filter housing (usually under the dashboard).
2. Remove the screws or clips securing the housing cover.
3. Take out the old cabin air filter and check for blockages or dirt.
4. Install the new cabin air filter, ensuring it is oriented correctly.
5. Reattach the housing cover and secure it with screws or clips.

4. Inspect and Repair Seals

Tools Required: Soapy water solution, replacement seals (if necessary).
Steps:
1. Inspect door and window seals for cracks or degradation.
2. Use soapy water to check for leaks; bubbles will form where air escapes.
3. Replace any damaged seals with new ones to prevent moisture ingress.

5. HVAC System Check

Steps:
1. Start the engine and turn on the HVAC system to the defrost setting.
2. Monitor for any unusual noises or lack of airflow.
3. If the HVAC system is not functioning correctly, refer to the service manual for further troubleshooting or consider professional service.