FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Genesis G70 IG (2017-2023) traction control light is on, what should I do? - Genesis G70
Home/Cars/Genesis/G70/IG (2017-2023)/my Genesis G70 IG (2017-2023) traction control light is on, what should I do?

my Genesis G70 IG (2017-2023) traction control light is on, what should I do?

Genesis G70 IG (2017-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
550 words

Problem Statement

Learn how to diagnose and fix the traction control light issue on Genesis G70 IG (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the vehicle to cool before inspecting brakes or ABS components.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Potential loss of traction in slippery conditions
  • •Engine power reduction during acceleration
  • •Unusual ABS behavior or light illumination
  • •Erratic handling or stability during cornering

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Brake fluid tester or suitable container

Parts Required

  • •Wheel speed sensor (if necessary)
  • •Traction control switch (if necessary)
  • •Brake fluid (if low)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the ignition is off.
  • Disconnect the negative battery terminal to prevent electrical short circuits.
2. Inspect Wheel Speed Sensors
  • Tools Required: Socket set, multimeter
  • Remove the wheel to access the wheel speed sensor.
  • Disconnect the sensor’s electrical connector.
  • Use a multimeter to test for continuity in the sensor wiring.
  • Inspect the sensor for physical damage or dirt; clean if necessary.
  • Reinstall the wheel and reconnect the battery terminal.
3. Check Brake Fluid and ABS Module
  • Tools Required: Brake fluid tester or suitable container
  • Open the hood and locate the brake fluid reservoir.
  • Check the fluid level; replenish with the recommended brake fluid if low.
  • Inspect the ABS module for any visible damage or corrosion.
  • If any error codes are found regarding the ABS module, consider replacing it.
4. Test Traction Control Switch
  • Tools Required: Multimeter
  • Locate the traction control switch on the dashboard.
  • Disconnect the switch and test for continuity with a multimeter while toggling the switch.
  • Replace the switch if it does not show continuity when engaged.
5. Tire Inspection
  • Inspect all tires for proper inflation and tread wear.
  • Ensure all tires are of the same type and size, replacing any mismatched tires.