FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Genesis G70 won’t unlock with the remote key fob what to do - Genesis G70
Home/Cars/Genesis/G70/IG (2017-2023)/my Genesis G70 won’t unlock with the remote key fob what to do

my Genesis G70 won’t unlock with the remote key fob what to do

Genesis G70 IG (2017-2023)

Error Codes
30 minutes to 1 hour
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
488 words

Problem Statement

Learn how to troubleshoot and fix the key fob not unlocking issue in Genesis G70. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is off while working on the key fob to prevent accidental locking or unlocking.

Symptoms

  • •Key fob buttons unresponsive
  • •No LED light illumination on the key fob when pressed
  • •Vehicle not responding to key fob signal
  • •Physical key not unlocking the door
  • •Possible 'key not detected' warning on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Small flat-head screwdriver
  • •Multimeter (optional)

Parts Required

  • •Key fob battery (typically CR2032)

Additional Information

Affected Component
Electrical
Estimated Time
30 minutes to 1 hour
Difficulty
medium
Severity
medium
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: small flat-head screwdriver, replacement battery (typically CR2032), and a multimeter (optional).
  • Ensure the vehicle is in a safe location and the engine is off.
2. Replace Key Fob Battery
  1. Open the Key Fob:

    • Use a small flat-head screwdriver to gently pry open the key fob casing.
    • Be careful not to damage the plastic casing during this process.
  2. Remove Old Battery:

    • Carefully take out the old battery from its compartment.
    • Note the orientation of the battery (positive and negative sides).
  3. Install New Battery:

    • Insert the new battery into the compartment, ensuring it is positioned in the same orientation as the old one.
    • Push down until it clicks into place.
  4. Reassemble Key Fob:

    • Align the two halves of the key fob and press them together until they snap securely.
    • Test the key fob by pressing the unlock button to check for LED illumination.
3. Verify Key Fob Functionality
  • Stand close to the vehicle and press the unlock button several times.
  • If the key fob still does not work, proceed to test the spare key fob if available.