what does it mean when my Genesis G70 shows a key fob not detected message

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is in a safe location and the ignition is off.
• Disconnect the battery to prevent any electrical shorts.

2. Replace Key Fob Battery

• Sub-steps:
  1. Open the key fob using a small flathead screwdriver or key fob tool.
  2. Remove the old battery, noting the orientation for the new battery.
  3. Insert the new battery (typically a CR2032) in the correct orientation.
  4. Reassemble the key fob securely.

3. Reprogram Key Fob (if necessary)

• Sub-steps:
  1. With the vehicle's ignition in the "ON" position (not started), press the lock button on the key fob for 5 seconds.
  2. Turn the ignition off and remove the key fob from the vehicle.
  3. Attempt to start the vehicle with the key fob again.

4. Inspect Keyless Entry System

• Sub-steps:
  1. Visually inspect the keyless entry receiver unit, usually located near the steering column or beneath the dashboard.
  2. Check for any loose connections or damaged wiring.
  3. If any issues are found, repair or replace as necessary.

5. Reconnect Battery

• Sub-steps:
  1. Reconnect the battery terminals, ensuring they are secure.
  2. Start the vehicle to confirm that it recognizes the key fob.

Tools Required:

• Small flathead screwdriver
• OBD-II scanner
• Multimeter

Parts Required:

• Key fob battery (CR2032 or as specified by the manufacturer)

Estimated Repair Time: 1-2 hours

Safety Warnings:

• Disconnect the battery before working on electrical components to avoid shorts.
• Ensure the vehicle is in a stable position before performing any work.